I'm thinking of gettingt a MOMO Steering wheel. I can't find many pics of them in thirdgens. Here is a pic of Mr. IROC-Z's: I think he has the fighter I also like the champion a lot Any one know what Momo Wheel Hub Kit I would have to get? Does anyone have any more pics. Thoughts and suggestions welcome. Thank you. ------------------ Danny deutsch1@marshall.edu Black, 1989 Camaro IROC-Z, 350 TPI 150 H.P. NOS, Progressive Controller,Comp Cams 1.6RR & Valve Springs, AFPR, Ram Air, K&N's, Airfoil, Ported Plenum, Accel 300+ Wires & Supercoil, !Cat, Flowmaster, Trans-Go Shift Kit, SFC's, STB, Goodyear F1's, Zainofied, T-Tops, Etc... Check out my Webpage [This message has been edited by 89Irocn2o (edited September 04, 2001).]

As soon as I get the many, many other priorities addressed, I'll be putting the Champion in my IROC. I think it's a great looking wheel and the suede is great to grab.

------------------

The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah

Btw you can see all of MOMO's wheels here:

http://www.momo.it/Momo/volantieng.html

Here are some other steering wheels:

http://www.grantproducts.com/idea.html

and

http://www.lecarra.com/wheels.shtml

I currently have a Grant Challenger Wheel

Haha, looks like Mr. Iroc rolls around with not much gas...

Those are pretty classy. How much are they $$(Fighter, Champion)?

------------------
92Z28
89GTA

They are very expensive, but very high quality from what I've heard. I haven't looked around to much I just stumbled upon them here: http://www.autospeed.com/cgi-bin/bro...?category=861&

You can get the Champion for $170


And The Fighter for $196


Plus I think you need a Momo Boss Kit (Hub), which is $48

If you have an air bag, its a mother to remove, but I did it and it was way worth it.

------------------
-------1992 Z28------
**New Evolution Racing**

http://ourworld.cs.com/ryanflowe/myhomepage/auto.html

[url=http://ourworld.cs.com/ryanflowe/myhomepage/favorite.html]
http://ourworld.cs.com/ryanflowe/myhomepage/favorite.html

That Momo wheel looks very similar to the wheel I just put in my IROC, a leather Grant GT. The only real difference is the color of the "spokes;" mine are black. I managed to get a billet aluminum centerpiece for the wheel with the Bow Tie engraved in it. I'm putting in a B&M Megashifter, too... I think that the shiny wheel center and the shiny shifter handle will provide a nice highlight in the interior. Total price was about $150... I drove over to Summit Racing to get it.



I guess I run around on empty too...

------------------
1986 Camaro IROC-Z
Code 23 Paint ("IROC Blue")
305 TPI w/ Auto Tranny
Grant GT Steering Wheel
New A/C Motor!

View my website, a work-in-progress

[This message has been edited by blue86iroc (edited September 04, 2001).]

Wow some of those look really nice. Does MOMO have an adapter for airbag cars? Or do they have to be modified like the Grant ones do? I'd like to replace my Grant with one of MOMO's cammado wheels.

------------------
91 Z28 1LE 5.7 automatic
SLP 1 3/4 headers, Random Technology cats, Borla exhaust, Accel 8.8 wires, Hotchkis STB, Pirelli P7000 Super Sports P 245/50ZR 16
More to come...

If you see them in person, you'll see that the Momo wheel is really quite a bit different than the Grant wheels. IMHO, the Momo stuff is in a whole different class. They're expensive, but if you price a leather Grant wheel, they're only a few dollars more.

------------------

The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah

I put a Momo wheel in my 92.After removing
the air bag installation is the same as any
other.It's probably illegal though, removing a safety device.I used the Momo hub adapter.
Part # is the same for all 82-92. Adapter cost me more than the used wheel I bought.

Do you have any pics? What MOMO wheel did you install?



------------------
Danny
deutsch1@marshall.edu
Black, 1989 Camaro IROC-Z, 350 TPI
150 H.P. NOS, Progressive Controller,Comp Cams 1.6RR & Valve Springs, AFPR, Ram Air, K&N's, Airfoil, Ported Plenum, Accel 300+ Wires & Supercoil, !Cat, Flowmaster, Trans-Go Shift Kit, SFC's, STB, Goodyear F1's, Zainofied, T-Tops, Etc...
Check out my Webpage

Are their any oulets in the US for these wheels? That one URL is in Australia.

------------------
92Z28
89GTA

Thunder Racing carries Momo steering wheels. I personally recommend Thunder Racing, too. Great bunch of people who know their stuff.

I bought my Momo hub adapter ( Part#mm2401)
from Sports Car Accessories, they've got a good selection of seats and pedals as well.
Adapter is $65. My wheel is older, and I don't see it pictured in any of the ads.
I'll try & post a picture of it tomorrow.

------------------
1992 RS,5 Speed,T-Tops,Eibach Springs(cut), KYB's, Lakewood Trailing Arms and Adjustable Panhard Bar,Posi Disc Rear,3.73 Gears,Summit Rearend Support Cover,
Del-A-Lum Bushings,300 HP Crate Motor,Crane Comp-U-Cam,Edelbrock TBI Intake, Turbo City Ported Throttle Body and Adjustable Fuel Pressure Regulator,Open Element
Air Cleaner, Ground Control Strut Tower Brace and Caster/Camber Adjusters,SLP 1-5/8" Headers,Flowmaster 3" American Thunder Exhaust,3" Cat,Centerforce Dual
Friction Clutch,Hayes Billet Flywheel,B&M Power Steering Cooler,Big Thumpin' Stereo.

Here is an updated picture.....with new shifter and my console put back together....and more Gas in the tank!

P.S.......if you have an air bag Car...1990-1992, the steering wheel was a bitch to put in! The removal of the bag was simple, but somehow, the Hub will not fit the AirBag column. I had to cut about one inch off the plastic part of the steering column to fit the Hub. Basically.,,,,,,it was a real pain in the ASSSSSSSSSS!!!!!!!!!!!



Tommy

------------------
Mr. IROC-Z
WWW.IROCZDESIGNS.COM Because looks are everything.

I didn't have to cut anything off my column to put the Momo wheel adapter and Wheel on,
but it was a snug fit.

Hey Rich,
Did you manage to turn off that stupid Air Bag light on the dash, after removing the airbag connectors. I have removed all fuses and connections to the air bag, but that stupid light still stays on????????

Do you have a pic of your car?

Tommy

------------------
Mr. IROC-Z
WWW.IROCZDESIGNS.COM Because looks are everything.

Yes, the stupid light still stays on,but I plan on removing the bulb next time I crawl under the dash.Haven't gotten around to it yet as I'm in the middle of replacing the engine.I'll try & post a photo tomorrow.

Rich

Is thier anywhere to buy these online? (other than the Ausi URL) Thunder Racing doesn't have these listed.



------------------
92Z28
89GTA

There's a TON of places. Just type momo or a specific wheel model into a search engine. Last time I looked I stopped price checking after 30 or 40 online places.


------------------

The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah

Check out these sites:

http://www.miata.net/products/ptm/ptm9706.html

http://www.momo-piaa-sparco.com/steering_wheels.html

I've been looking at the first wheel for a while now. I never realise HOW kick *** it was until now.

------------------
-Tas
'89 Formula WS-6

305, TBI, auto, 14x3 chrome flat based open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips....

To be installed eventually far far far into the future: Yours if the price is right and I don't have to ship :
Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248), Catco 3" cat, and injector spacer.

Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
AOL IM: superGRtaz

I have a picture of mine now, but don't know how to post it.Any help would be appreciated.
thanks,
Rich


------------------
1992 RS,5 Speed,T-Tops,Eibach Springs(cut), KYB's, Lakewood Trailing Arms and Adjustable Panhard Bar,Posi Disc Rear,3.73 Gears,Summit Rearend Support Cover,
Del-A-Lum Bushings,300 HP Crate Motor,Crane Comp-U-Cam,Edelbrock TBI Intake, Turbo City Ported Throttle Body and Adjustable Fuel Pressure Regulator,Open Element
Air Cleaner, Ground Control Strut Tower Brace and Caster/Camber Adjusters,SLP 1-5/8" Headers,Flowmaster 3" American Thunder Exhaust,3" Cat,Centerforce Dual
Friction Clutch,Hayes Billet Flywheel,B&M Power Steering Cooler,Big Thumpin' Stereo.

Email me the pic at deutsch1@home.com and I will post it.

Not interested in Grant? Just thought I'd ask. I have one in my car and I really like it. I got the carbon fiber model. Check it out.




------------------
You don't have to wear a tuxedo to sport a bowtie!

Some pictures of my mess in progress.
http://www.geocities.com/Jamie_Caruvana/

Here is RICH92RS350's MOMO Steering wheel.



Looks sharp Rich, how do you like it?

<hr>

Which one the Champion or the Fighter? I think the Champion is my favorite.

Thanks for posting my photo.Although my
Momo wheel is a little worn (bought it used)
it's the best wheel I've ever had.Feels great
in my hands and looks cool too.Not sure what model it is, this style may be out of production, but I'm very happy with it.

Rich