January 2013 COTM **WINNER**
01-05-2013, 05:01 PM
#1
January 2013 COTM **WINNER**
Congratulations to IROCThe5.7L for winning January 2013's COTM!
Engine:
L98: 5.7L 350 Ci.
AFR 195 65cc Eliminator Heads
Comp Cam XR276HR-10
Holley Stealth Ram Intake
Comp Cam hardened pushrods
Comp Cam Pro Magnum 1.6 RR's
Comp Cam Lifters
Double roller timing chain
ARP bolts everywhere
Rear End:
Moser Engineering - 12 Bolt Rear
Center Section: Detroit Truetrac - 33 Spline
Gear Ratio: 3.73
Exhaust:
Hooker 2055 Ceramic Coated Headers / 3" Coated Y Pipe
3" Catco Hi-Flow Cat
3" I-Pipe
Powerstick Muffler (Medium Length)
Intake:
Polished Holley Stealth Ram
K&N's
TPiS Throttle Body Airfoil
Gutted Airbox
Ignition:
MSD 8.5mm Wires
MSD Blaster Coil
MSD Cap/Rotor
AC Delco Rapid Fire Plugs
Fuel System:
Flowmatched 32lb Ford Motorsport Fuel Injectors
Holley Adjustable Fuel Pressure Regulator
Racetronix L98 Fuel Pump Kit
-Walbro GSS340M 255L/Hr Fuel Pump
-Fuel Pump Hot Wire Upgrade Harness
Suspension/Chassis:
Spohn Sub Frame Connectors
Spohn Adjustable Panhard Bar
Spohn Crossmember Mounted Adjustable Torque Arm
Spohn Front & Rear Sway Bars
Pro Kit Lowering Springs
UMI Lower Control Arms
UMI Tubular K-member & A-arms
700r4 Transmission:
Modified Probuilt Transgo shift kit
Cooling:
160 Thermostat
Fan Switch
Throttle Body Bypass
Stewart Hi-Flow Waterpump
Braking:
Zinc coated drilled/slotted rotors all around
Hawk HPS Performance brake pads
Audio:
Sony CD Player
Kappa 693.7i 3-way 6x9 Speakers
10'' Sub
Engine:
L98: 5.7L 350 Ci.
AFR 195 65cc Eliminator Heads
Comp Cam XR276HR-10
Holley Stealth Ram Intake
Comp Cam hardened pushrods
Comp Cam Pro Magnum 1.6 RR's
Comp Cam Lifters
Double roller timing chain
ARP bolts everywhere
Rear End:
Moser Engineering - 12 Bolt Rear
Center Section: Detroit Truetrac - 33 Spline
Gear Ratio: 3.73
Exhaust:
Hooker 2055 Ceramic Coated Headers / 3" Coated Y Pipe
3" Catco Hi-Flow Cat
3" I-Pipe
Powerstick Muffler (Medium Length)
Intake:
Polished Holley Stealth Ram
K&N's
TPiS Throttle Body Airfoil
Gutted Airbox
Ignition:
MSD 8.5mm Wires
MSD Blaster Coil
MSD Cap/Rotor
AC Delco Rapid Fire Plugs
Fuel System:
Flowmatched 32lb Ford Motorsport Fuel Injectors
Holley Adjustable Fuel Pressure Regulator
Racetronix L98 Fuel Pump Kit
-Walbro GSS340M 255L/Hr Fuel Pump
-Fuel Pump Hot Wire Upgrade Harness
Suspension/Chassis:
Spohn Sub Frame Connectors
Spohn Adjustable Panhard Bar
Spohn Crossmember Mounted Adjustable Torque Arm
Spohn Front & Rear Sway Bars
Pro Kit Lowering Springs
UMI Lower Control Arms
UMI Tubular K-member & A-arms
700r4 Transmission:
Modified Probuilt Transgo shift kit
Cooling:
160 Thermostat
Fan Switch
Throttle Body Bypass
Stewart Hi-Flow Waterpump
Braking:
Zinc coated drilled/slotted rotors all around
Hawk HPS Performance brake pads
Audio:
Sony CD Player
Kappa 693.7i 3-way 6x9 Speakers
10'' Sub
Last edited by IROCThe5.7L; 01-05-2013 at 06:58 PM.
01-05-2013, 05:14 PM
#2
Member
Join Date: Sep 2011
Location: Omaha, NE
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS, 2012 Camaro SS 45th
Engine: L03 305 TBI V8, Blown 6.2L LS3
Transmission: 700R4, TR6060
Axle/Gears: GM 7.6" 10 Bolt 2.73
Re: January 2013 COTM **WINNER**
That has got to be the most bad *** camaro i have seen.
01-05-2013, 05:41 PM
#3
Senior Member
Join Date: May 2011
Location: Los Angeles, California
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Chevrolet Camaro Z28
Engine: 5.7 TPI
Transmission: 700R4 Overdrive Automatic
Axle/Gears: 3.23:1 Positraction
Re: January 2013 COTM **WINNER**
Congratulations
01-05-2013, 05:46 PM
#5
Supreme Member
Re: January 2013 COTM **WINNER**
Same paint and trim as my 2nd third gen but mine wasn't nearly as well executed.
Well done.
Well done.
01-05-2013, 07:42 PM
#7
Member
Join Date: Feb 2002
Location: Olean,NY
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Re: January 2013 COTM **WINNER**
Congratulations man I have admired your car for years! It is SO clean and so gorgeous and I'm only about an hour away from you. I'd love to see it sometime! You should take it to the Ellicotville car show this summer!
Trending Topics
01-05-2013, 08:10 PM
#8
Junior Member
Join Date: Oct 2011
Location: pennsylvania nepa
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 camaro iroc-z
Engine: 5.7 l
Transmission: 700r4
Axle/Gears: 2.77 pos
Re: January 2013 COTM **WINNER**
Congratz the car looks amazing ive got an 89 exact same trim all original wih 35,000 miles ..and ive always wondered what it would look like if i were ever modify it .That looks like it would handle lie its on a rail. VERY NICE good luck with it..
01-05-2013, 08:59 PM
#10
Member
iTrader: (1)
Join Date: Jul 2011
Location: Springfield,Illinois
Posts: 479
Likes: 0
Received 7 Likes
on
5 Posts
Car: 1987 TA GTA, 1987 IROC 1988 Formula
Engine: 350 tpi/305 tpi/350 tbi
Transmission: All have 700r4's
Axle/Gears: 10 bolt with 3:73's
Re: January 2013 COTM **WINNER**
Congrats on winning, I have a soft spot for black IROC's with the blue stripe.
01-06-2013, 12:58 PM
#12
Member
iTrader: (1)
Join Date: Sep 2009
Location: Allegan, MI
Posts: 199
Likes: 0
Received 1 Like
on
1 Post
Car: 89' camaro RS TTOP
Engine: 92 5.0tpi Bosch III, headers, msd
Transmission: 700r4 built. trans go. 2,300 stall
Axle/Gears: 3:73 posi ls disc brake conversion
Re: January 2013 COTM **WINNER**
Nicely done. Congratulations!
01-06-2013, 03:19 PM
#15
Supreme Member
iTrader: (2)
Join Date: Dec 2000
Location: Buffalo, NY
Posts: 2,361
Likes: 0
Received 2 Likes
on
1 Post
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
Re: January 2013 COTM **WINNER**
Congratulations! I've enjoyed your car on here for years. If I'm not mistaken, you also live in the Buffalo area. If you're up for it, I' d love to do some photos of our cars together in the summer.
01-06-2013, 04:19 PM
#16
Supreme Member
Re: January 2013 COTM **WINNER**
Very nice stance, love that car.
01-06-2013, 05:31 PM
#17
Member
Join Date: Apr 2008
Location: Chicago, IL
Posts: 371
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 IROC Z28
Engine: 305 TPI
Transmission: TKO 600
Axle/Gears: 3.45 (G92 package)
Re: January 2013 COTM **WINNER**
congratulations... Wish mine was this sick; someday it will be 
I'm in love with your car man
I'm in love with your car man
01-06-2013, 10:14 PM
#19
Senior Member
Join Date: Mar 2011
Location: dothan, al
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 pontiac trans am
Engine: None
Transmission: None
Axle/Gears: 10 Bolt
Re: January 2013 COTM **WINNER**
Awesome camaro! What size tires do you have? Also how much actually difference did the springs make?
01-07-2013, 07:05 PM
#20
Senior Member
iTrader: (3)
Join Date: Aug 2008
Location: Memphis, TN
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 z28 Purple Haze
Engine: 5.7L Tuned Port Injection
Transmission: 700R4
Axle/Gears: 3.23 both spinning
Re: January 2013 COTM **WINNER**
nice car! Congratulations!
01-07-2013, 09:34 PM
#22
Member
Join Date: Sep 2010
Location: Bardstown, KY
Posts: 187
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1956 Chevrolet 210
Engine: Chevy 305 V8
Transmission: TH350
Axle/Gears: Posi 3.42
Re: January 2013 COTM **WINNER**
Congratulations on the win! Great car, man! I've always liked the black IROC's with the blue stripe.
01-08-2013, 09:01 AM
#24
Senior Member
iTrader: (1)
Join Date: Feb 2011
Location: Round Rock, TX
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Firbird formula 350
Engine: 5.7L TPI
Transmission: 700R4
Axle/Gears: 3.27 Nine Bolt
Re: January 2013 COTM **WINNER**
Congratulations, that's one fine IROC-Z.
01-10-2013, 03:28 PM
#31
Moderator
Re: January 2013 COTM **WINNER**
Thanks again guys!
I'd like to make it out. Do you go to the Olcott show?
Cool. Hopefully she's running by then.
245/50/16 I believe. The prokit lowered it 1" and it rides much better than with the stock springs.
Yea, it only made 316rwhp. The tune was off, and I let off to early. I should have strung it out to 6500rpm. But I'm building a new engine so I have no plans to keep tuning the L98.
Yea, it only made 316rwhp. The tune was off, and I let off to early. I should have strung it out to 6500rpm. But I'm building a new engine so I have no plans to keep tuning the L98.
01-12-2013, 08:09 AM
#33
01-12-2013, 06:07 PM
#36
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: January 2013 COTM **WINNER**
Congrats mate. I've always liked this car.
01-13-2013, 05:21 PM
#40
Moderator
01-14-2013, 01:31 PM
#42
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: January 2013 COTM **WINNER**
Congrats buddy! Beautiful car.
Thanks JT for getting the pages handled while I was out of town and sick!
Thanks JT for getting the pages handled while I was out of town and sick!
01-14-2013, 07:10 PM
#43
Moderator
Re: January 2013 COTM **WINNER**
Thanks again guys! Just going to throw these in here. Sorry I'm getting excited-lol It's almost there.
01-14-2013, 08:26 PM
#44
01-15-2013, 12:10 AM
#45
Moderator
Re: January 2013 COTM **WINNER**
Yes. Just barely. This intake was used on my L98 also.
01-15-2013, 04:40 AM
#47
01-15-2013, 09:48 PM
#49
Supreme Member
iTrader: (4)
Join Date: Dec 2001
Location: Chicagoland
Posts: 9,666
Received 546 Likes
on
376 Posts
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: January 2013 COTM **WINNER**
Beautiful!!!!! Nice stance. What products do you use on your paint?
01-18-2013, 11:40 PM
#50
TGO Supporter
iTrader: (1)
Join Date: Jan 2002
Location: Hampden Maine
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Firebird
Engine: Stealth Rammed 412 with TC78 Turbo
Transmission: '93 T-56
Axle/Gears: 3.27 9 bolt posi with PBR discs
Re: January 2013 COTM **WINNER**
Congratulations sir, gorgeous car, I've always admired it!!!!
-Paul
-Paul
