Rims from an Impala SS
01-27-2002, 11:17 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2001
Location: Blacklick, Ohio, USA
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 RS
Engine: 5.7 tbi
Transmission: 700r4
Rims from an Impala SS
Would rims from a 94 to 96 LT1 Impala SS fit a third gen? They are 17x8.5 with a 6.00 mm offset and 5" bolt center. Would I need spacers or a different size front and rear?
Thanks in advance,
GC
:lala: What the hell is this?
Thanks in advance,
GC
:lala: What the hell is this?
01-27-2002, 11:45 PM
#3
Supreme Member
Join Date: Aug 1999
Location: Mililani, HI USofA Search Posts: 2848.............. Whore Posts: 47.................. Magical Whore Posts: 1
Posts: 3,534
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro 77K
Engine: 3.1 Vslick
Re: Rims from an Impala SS
Originally posted by gcore45
:lala: What the hell is this?
:lala: What the hell is this?
01-28-2002, 04:57 AM
#6
Supreme Member
iTrader: (1)
Join Date: Aug 1999
Location: Rowlett, TX
Posts: 2,842
Likes: 0
Received 5 Likes
on
5 Posts
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Impala wheels will not fit a thirdgen because of the 5 on 5" bolt pattern. Third (and fourth) gens are 5 on 4.75"
Trending Topics
02-09-2014, 07:16 AM
#8
Junior Member
Join Date: Nov 2012
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 rs camaro
Engine: l31 swap
Transmission: 700r4
Axle/Gears: 2.7
Re: Rims from an Impala SS
Ok I have these rims on my camaro and let me tell you there awesome. I found out you can get them to fit by buying brake rotors from a 2000 astro van. Turns out they fit the spindle perfect. As long as you have the standard spindles. Also I have a 91 camaro so I got lucky with the rear axles from a astro van since I have a 28 spline rear end. I tried spacers very bad idea the front will rub and the rears stick out alot and hit the well (on every bump).
02-09-2014, 10:04 AM
#9
COTM Editor (Retired)
Re: Rims from an Impala SS
Ok I have these rims on my camaro and let me tell you there awesome. I found out you can get them to fit by buying brake rotors from a 2000 astro van. Turns out they fit the spindle perfect. As long as you have the standard spindles. Also I have a 91 camaro so I got lucky with the rear axles from a astro van since I have a 28 spline rear end. I tried spacers very bad idea the front will rub and the rears stick out alot and hit the well (on every bump).
02-09-2014, 10:42 AM
#10
Junior Member
Join Date: Nov 2012
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 rs camaro
Engine: l31 swap
Transmission: 700r4
Axle/Gears: 2.7
Re: Rims from an Impala SS
Last edited by GaSS burner; 02-09-2014 at 11:19 AM. Reason: inserting picture
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
Wheels and Tires
32
12-10-2019 04:06 PM
