BodyGeneral body information and techniques for restoration, repairs, and modification.
Sponsored by ThirdGen Ranch
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i have an 86 camaro with the 3 piece spoiler and i want to put the high rise spoiler on, how should i go about filling the holes from the 3 piece spoiler? anyone done this?
__________________ 1986 Camaro 305 TPI Conversion, Accel Base / Runners / AFPR, Holley 52mm TB, FMS 42# Injectors, 7749 with $59 3-bar map, WP 305 S/R Torquer Heads, Crane Powermax 2032 Roller cam, CompCams 1.6 Magnum Roller Rockers, Hedman Coated Headers, Edelbrock Cat-Back, Tremec TKO-600 with CF DF Clutch, Lakewood Scattershield, Moser 12 Bolt 3.73 Posi rear, Spohn LCA's & Relocation brackets, Lakewood adj panhard. 36/24 Swaybars, Spohn Subframe Connectors, Spohn TKO Crossmember with DS Loop, Spohn Steel Driveshaft, Hotchkis Strut Brace, Eibach Pro-Kit, Tokico Illumina Struts and Shocks, Procharger D1SC 12#'s, LS1 Brakes Front, Wilwood Pro Series Rear. 381HP/400FT/LB's on 10#'s of boost
the only way to do it is to have the rear of the car repainted. i guess you can rig it somehow and fill the holes with something and oaint it to match the car but it wont be perfect. a body shop will have to fill the holes
I put 1 on my 90 camaro i Just took little round peices of metal i got off of an electric box that were a little bigger than the holes. Then i wleded the holes in with them then covered the weldes with some duraglass then a bit of filler . I repainted the whole car tho.
__________________ 1990 Camaro RS M5 - Under construction
2001 Camaro SS #2855 M6 26k miles - Sold FQuick
