04-19-2004, 12:14 AM
|
#1 |
| Senior Member
Join Date: Dec 2002 Location: Bremen, GA.
Posts: 524
Car: 1988 Camaro Engine: 355, 10.34:1, 249/252 @.050", IK200 Transmission: TH-400, 3500 stall 9.5" converter Axle/Gears: Ford 9", detroit locker, 3.89 gears | Cyberdyne digital gauge panel.. help needed!!
I just put a good used cyberdyne digital gauge panel P/N 4004 in my 88 camaro and having some trouble with the speedo, fuel level and oil psi gauges.
The fuel level gauge won't show nothing but "-1" (right after I added 5 gal of fuel it did go up to 6 gal, but a few hours later it went back to "-1" and saying there now)
The oil psi gauge will show "--" or "-1".
The speedo wont show nothing but "10" or "11".
Those gauges reads those numbers with engine running and not running. I aint drove the car yet so I don't know if the MPH will change when car moves or not
The volt, water temp and tach all reads right...
Oh BTW... the oil sender is a new sender for gauge not light, The speed sender deal is on and hooked up right,
Any help or ideas would be great!!
Thanks | | | |
 
|  |
