BodyGeneral body information and techniques for restoration, repairs, and modification.
Sponsored by ThirdGen Ranch
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Ok, I have my gauges out and on my bench. I notched the faces so I could mount the glow overlays. Well, everything seems OK except for I have NO idea how to glue these to the gauges! I was going to try double-sided tape, but it comes too close to the round part on the needles.
Also, the odometer part doesn't line up with my #'s... can I just use an X-Acto and cut it to fit? The part I want to cut is part of the halo part; on the back is in the silvery-stuff area.
Well, I used some thin CA super glue and it seems to hold them just fine. Now all I'm waiting for is the go-ahead to cut my odometer opening on the glow gauge face bigger!
