Need a Drivers side door!!! Can't find anything local (Seattle) - Third Generation F-Body Message Boards

NW94Z · 06-18-2009, 05:59 PM

Hey guys,

I need to replace the drivers side door on my 91 RS and I can't find anything local. I live near Seattle and i've gone through the entire Western Washington region. I figure someone on here will know about junkyards that do business at the national level and will be able to point me in the right direction.

Thanks in advance.

This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!

Thirdgen Ranch · 06-18-2009, 06:11 PM

We have doors available on our website.

NW94Z · 06-18-2009, 11:58 PM

Quote:

Originally Posted by Thirdgen Ranch

We have doors available on our website.

Thanks. Will be contacting you.

gregsz-28 · 06-19-2009, 02:12 AM

I know there are some junkyards around Poulsbo and East Bremerton that each have a few Camaros, and I know they have DS doors.

NW94Z · 06-19-2009, 10:08 AM

Quote:

Originally Posted by gregsz-28

I know there are some junkyards around Poulsbo and East Bremerton that each have a few Camaros, and I know they have DS doors.

Do you happen to know their names. Local would be easier.

Al Hasse · 06-19-2009, 09:53 PM

Eastside Auto Wrecking in Bremerton might have a couple left. I don't get in there much any more since they are now closed on weekends.

Airport Wrecking on Hwy 3 toward Belfair has had a few 3rd gens for a while, but pretty picked over.

Yank-a-Part (formerly Jim's Auto Wrecking) in Poulsbo doesn't have much to choose from, but might be worth a look.

Continuing south on Hwy 3 from Airport Wrecking, there is Belfair Wrecking, but not much to choose from there. About 20-25 or so miles further south, there is a HUGE yard that I've only driven by, All West Coast Auto Wrecking - www.awcaw.com/index.htm

NW94Z · 06-20-2009, 12:48 AM

Quote:

Originally Posted by Al Hasse

Eastside Auto Wrecking in Bremerton might have a couple left. I don't get in there much any more since they are now closed on weekends.

Airport Wrecking on Hwy 3 toward Belfair has had a few 3rd gens for a while, but pretty picked over.

Yank-a-Part (formerly Jim's Auto Wrecking) in Poulsbo doesn't have much to choose from, but might be worth a look.

Continuing south on Hwy 3 from Airport Wrecking, there is Belfair Wrecking, but not much to choose from there. About 20-25 or so miles further south, there is a HUGE yard that I've only driven by, All West Coast Auto Wrecking - www.awcaw.com/index.htm

Thanks for the feedback. I'll be making some phone calls tomorrow.

1piece@atime · 06-20-2009, 02:24 AM

I have one with manual windows off an 84 bird. Really clean if I remember right but it's been awhile since I looked at it. Puyallup, $50

popballz · 06-20-2009, 02:36 AM

Quote:

Originally Posted by Al Hasse

About 20-25 or so miles further south, there is a HUGE yard that I've only driven by, All West Coast Auto Wrecking - www.awcaw.com/index.htm

thats right by our lake property

so if you find out there is a few third gens there I'll have to check it out

and there is also one across the street from that place also.

NW94Z · 06-20-2009, 05:25 PM

Quote:

Originally Posted by 1piece@atime

I have one with manual windows off an 84 bird. Really clean if I remember right but it's been awhile since I looked at it. Puyallup, $50

Sorry need a door with power. Thanks though.

Quote:

Originally Posted by popballz

thats right by our lake property

so if you find out there is a few third gens there I'll have to check it out

and there is also one across the street from that place also.

Found a door at this place so they must have 3rd gens.

Thanks to everyone for all your help!!