Please help, body questions about 90 and 91 camaros - Third Generation F-Body Message Boards

djfrazenrat · 07-07-2009, 10:50 PM

So my car was made in 06/91 and I hit a bear and need a new hood, bumper, passenger fender, door and pass window. I found another car made in 11/89, will the body parts fit, I opened up the hood and everything looks like it will all fit in the right spots but I need to make sure before I buy the whole thing as a parts car, there both 3.1 v6

scottmoyer · 07-08-2009, 01:49 PM

The lower ground effects of the 91 car will attach slightly differently than the 89. The holes in the fender won't line up correctly. Many people have still used the older fenders on the newer car, and modified the holes to fit. The front bumper cover is different as is the front GFX, but they will bolt right up to the car with no mods if you do a front clip swap.

quickkris2006 · 07-11-2009, 01:26 AM

usually u can use any parts from 82-92 with very little mods needed for your third gen camaro

87cmroiroc305ho · 07-21-2009, 12:27 PM

i have an 86 nose n fenders on my 92 rs, and correct, the side skirts arent right, i have to mod them to fit, wich is a matter of drilling and bolting them down