Go Back   Third Generation F-Body Message Boards > Tech Boards > Body
Sign in using an external account
Register Forgot Password?

Body General body information and techniques for restoration, repairs, and modification.
Sponsored by ThirdGen Ranch

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 09-20-2009, 08:03 PM   #1
Senior Member
 
Join Date: Apr 2002
Posts: 5,167

Classifieds Rating: (21)
91-92 Front Bumper Removal

Ok, I removed the three bolts from each side removed.

I removed the top 7 screws as well.

What else am I missing here.....
__________________
FLYNLOW92rs is offline vBGarage Page   Reply With Quote
Old 09-21-2009, 12:51 AM   #2
Senior Member
 
zraffz's Avatar
 
Join Date: Mar 2009
Location: Sussex County, NJ
Posts: 726
Car: 1994 Z28
Engine: LT1
Transmission: 4L60E

Classifieds Rating: (0)
Re: 91-92 Front Bumper Removal

Uh I can't remember off the top of my head it sounds like you got them all. I remember I pulled my headlights out with the bumper so check to make sure nothing is holding the headlights in still.
zraffz is offline vBGarage Page   Reply With Quote
Old 09-21-2009, 12:56 AM   #3
Banned
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,214
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Re: 91-92 Front Bumper Removal

Crawl under the car & look up. The lower part of the nose has screws too.

You might wanna put those fender nuts back on (at least one per side) to keep the nose from leaning forward, until you get everything else loose.
Stephen is offline vBGarage Page   Reply With Quote
Old 09-21-2009, 01:03 AM   #4
Senior Member
 
zraffz's Avatar
 
Join Date: Mar 2009
Location: Sussex County, NJ
Posts: 726
Car: 1994 Z28
Engine: LT1
Transmission: 4L60E

Classifieds Rating: (0)
Re: 91-92 Front Bumper Removal

Quote:
Originally Posted by Stephen View Post
Crawl under the car & look up. The lower part of the nose has screws too.

You might wanna put those fender nuts back on (at least one per side) to keep the nose from leaning forward, until you get everything else loose.
I could swear the screws under there held the skirt onto the bumper, not the bumper onto the front of the car... but I could also swear their were brackets somewhere down there cause I remember cutting them out.
zraffz is offline vBGarage Page   Reply With Quote
Old 09-21-2009, 12:19 PM   #5
Member
 
sid rs91's Avatar
 
Join Date: May 2007
Location: Vancouver, B.C
Posts: 280
Car: 91 RS TBI 91 Z28 TPI
Engine: 305
Transmission: wc T5

Classifieds Rating: (0)
Re: 91-92 Front Bumper Removal

did you unclip the the lip from bottom of fenders?
theres two bolts near center of nose that have to come out too
__________________

sid rs91 is offline vBGarage Page   Reply With Quote
Old 09-21-2009, 12:22 PM   #6
Senior Member
 
Join Date: Apr 2002
Posts: 5,167

Classifieds Rating: (21)
Re: 91-92 Front Bumper Removal

Quote:
Originally Posted by sid rs91 View Post
did you unclip the the lip from bottom of fenders?
yup,

Got the cips that attach the front chin spoiler to the fenders near the wheel well..

Maybe I'm just going

Is there a manual with directions, or possibly a schematic that shows which bolts/screws need to be removed?
FLYNLOW92rs is offline vBGarage Page   Reply With Quote
Old 09-21-2009, 12:28 PM   #7
Member
 
sid rs91's Avatar
 
Join Date: May 2007
Location: Vancouver, B.C
Posts: 280
Car: 91 RS TBI 91 Z28 TPI
Engine: 305
Transmission: wc T5

Classifieds Rating: (0)
Re: 91-92 Front Bumper Removal

lol........i couldn't find one when i was taking mine apart.
i'll go and take a look at mine in abit and see if it jog's my memory...
sid rs91 is offline vBGarage Page   Reply With Quote
Old 09-21-2009, 12:44 PM   #8
Member
 
sid rs91's Avatar
 
Join Date: May 2007
Location: Vancouver, B.C
Posts: 280
Car: 91 RS TBI 91 Z28 TPI
Engine: 305
Transmission: wc T5

Classifieds Rating: (0)
Re: 91-92 Front Bumper Removal

when i did mine i left the light housings on the bumper.
so 3 bolts on both fenders
unclip chin spoiler from fenders
3 bolts on inside of light pockets both sides
2 bolts in center of bumper by hood latch

think thats it may be one or two on the bottom of light pockets?
man i must be getting old......just put the car back together 2months ago after paint
sid rs91 is offline vBGarage Page   Reply With Quote
Old 09-21-2009, 11:52 PM   #9
Junior Member
 
Join Date: Sep 2009
Posts: 40

Classifieds Rating: (0)
Re: 91-92 Front Bumper Removal

there are 4 bolts on each side of the bumper holding on to the fenders, inside top of the fender where u cant see, put your hand up there and feel
tylerf is offline vBGarage Page   Reply With Quote
Old 09-22-2009, 12:41 AM   #10
Senior Member
 
Join Date: Apr 2002
Posts: 5,167

Classifieds Rating: (21)
Re: 91-92 Front Bumper Removal

Quote:
Originally Posted by tylerf View Post
there are 4 bolts on each side of the bumper holding on to the fenders, inside top of the fender where u cant see, put your hand up there and feel
I got the top three out and just noticed the 4th......

I'll have to figure out a way to reach those things......
FLYNLOW92rs is offline vBGarage Page   Reply With Quote
Old 09-22-2009, 02:41 AM   #11
Junior Member
 
Join Date: Sep 2009
Posts: 40

Classifieds Rating: (0)
Re: 91-92 Front Bumper Removal

i use the smallest socket wrench, with a long 10m socket, takes a little longer but works
tylerf is offline vBGarage Page   Reply With Quote
Old 09-22-2009, 05:38 PM   #12
Senior Member
 
Join Date: Apr 2002
Posts: 5,167

Classifieds Rating: (21)
Re: 91-92 Front Bumper Removal

Quote:
Originally Posted by tylerf View Post
i use the smallest socket wrench, with a long 10m socket, takes a little longer but works
I should probably invest in a long 10mm socket, I've been using my wrench since I don't have one that will clear the screws....
FLYNLOW92rs is offline vBGarage Page   Reply With Quote
Old 09-22-2009, 05:38 PM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > Body

Tags
1986, 1991, 2010, 91, 92, bumper, camaro, camero, front, gen, lights, pictures, removal, spoiler, z28
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 10:47 PM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.5.2
All content copyright © 1997 - 2012 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details