removing Bumper cover + Fenders as one piece
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Michigan
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Base model & '91 Trans Am
Engine: 3.4L & Gen1 SBC 350
Transmission: 700r4
Axle/Gears: 3.73 and 3.42
removing Bumper cover + Fenders as one piece
I know this is a time-old question and I have seen 3-4 threads in search about it, BUT, i wanted some clarification and didn't wanna revive a thread from 15 months ago.
It's possible to pull both fenders AND the bumper cover off at once yes? To do this, I remove the xnumber of bolts under the hood on both fenders and xnumber on both door jambs, and possibly a few under each fender...
Now where are the 2? bolts that i want to remove for the bumper cover, and where are the 2? bolts i DON't wanna remove for the bumper cover...
second part of the question, might seem silly, but... after removing these panels as one component, is it able to be reinstalled on a vehicle AS one component, or will I have to remove the bumper cover and put the fenders on first before reassembling?
It's possible to pull both fenders AND the bumper cover off at once yes? To do this, I remove the xnumber of bolts under the hood on both fenders and xnumber on both door jambs, and possibly a few under each fender...
Now where are the 2? bolts that i want to remove for the bumper cover, and where are the 2? bolts i DON't wanna remove for the bumper cover...
second part of the question, might seem silly, but... after removing these panels as one component, is it able to be reinstalled on a vehicle AS one component, or will I have to remove the bumper cover and put the fenders on first before reassembling?
#2
Member
iTrader: (1)
Join Date: Oct 2008
Location: Bucks County, PA
Posts: 436
Received 0 Likes
on
0 Posts
Car: 1991 RS
Engine: 383 stroker
Transmission: 700R4
Axle/Gears: 3.23 posi
Re: removing Bumper cover + Fenders as one piece
I really don't see any pros to taking the whole thing off in one piece since there are only four bolts that attach the cover to each fender, BUT, if you have to.....there are at least 2 points where the fender is bolted to the frame near the front. You would have to access them thru the wheel well with the tires and the plastic wheel well guard piece off. Remove the tires and plastic guard and you'll be able to see what I'm talking about. There are lots of nylon rivets that hold the nose to car so be prepared to buy some more after you break them and throw them across the garage. Have fun
#3
Member
Join Date: Jan 2009
Location: Brockport, PA
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 FireBird
Engine: 305 TPI
Transmission: AUTO
Axle/Gears: 3.42
Re: removing Bumper cover + Fenders as one piece
correct and you gotta remove the antenna nut too. and the reason i did it is the fasteners that hold the bumper cover too the fender were rusted in place and were twisting the plastic on the bumper cover and i did not want to ruin it.
and they can be reinstalled as one unit as well...also you might wanna have someone else handy. i needed somebody to help me remove and reinstall so i didnt bang it up
and they can be reinstalled as one unit as well...also you might wanna have someone else handy. i needed somebody to help me remove and reinstall so i didnt bang it up
#4
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Michigan
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Base model & '91 Trans Am
Engine: 3.4L & Gen1 SBC 350
Transmission: 700r4
Axle/Gears: 3.73 and 3.42
Re: removing Bumper cover + Fenders as one piece
Alright, thanks guys.
#5
Member
iTrader: (2)
Join Date: Feb 2010
Posts: 460
Likes: 0
Received 3 Likes
on
3 Posts
Car: '89 Camaro
Engine: LS1
Transmission: 4L65/70E
Axle/Gears: 9 Inch, 3.70 gears
Re: removing Bumper cover + Fenders as one piece
you can remove the whole front end as one piece, except the hood. the fender bolts (top and bottom), 8 (i believe) bumper bolts, and possibly some bracing under the bumper. i've done this numerous times on my 85 ta, however it was about 8 or 10 years ago. you don't need another person to do this, i did it by myself.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
1
08-25-2015 11:49 PM