my passenger side wiper arm hits my hood as it wipes. Has anyone had this problem. And how did you correct it? ------------------ 82Z 305 w/comp 270 magnum cam,Edelbrock Performer RPM,Holly 1850-4,serpentine belt drive.TH700R4 w/B&M holeshot 2000 converter,& megashifter.1LE front brakes, 9bolt 3.27 w/1LE rear brakes.Aluminum driveshaft,boxed rear susp.poly everything,IROC swaybar+wonderbar. 70mph@2200rpm ASE Master Tech plus L2 also recently obtained a '69 chevelle SS396 w/Turbo 400,3.31 posi,11.0 to 1, headers,etc. Latest project car,'86 IROC stock 305TPI hit on left side,but not too bad

Mine we doing the opposite, the drivers side wiper was going about 6 inches off the side of the car, it turned out that the shaft for the wiper arm was stripped and the wiper was not properly aligned. I just bought a whole new wiper transmission from the motor to the blades at a junkyard for $30.

I have the same exact problem with my passenger side wiper arm hitting the hood I haven't tried to fix it really but I think there is a way to adjust the hood upwards. Open the hood and look near the the back of the fenders (underneath the hood) there should be little black knob/screw type things that you can't screw and adjust the hood up a bit. Not sure if that will help but it's worth a try.

Check to see if the arm is bent and that the plastic stop below where the wiper rests is still in place and not broke off thats how mine got bent.