ls1 e-brake cables

[abray1]

Hey gang, I installed a ford 9 rear in my 89 iroc with 2002 trans am ls1 rear brakes. Has anyone figured out what to do for e-brake cables. My 89 came with a 9 bolt borg warner rear which I have put in my 92 purple haze z28 and I used the 9 bolt cables with it since they would not fit the ls1 set-up. By the way I got the 9 ford housing and adjustable kit from autoweldchassis.com They make great stuff. Any help on the e-brake cables will be greatly appreciated since that is one of the last things I have to fix.

[85MikeTPI]

I followed the advice on these threads:

http://www.thirdgen.org/techboard/br...backing+plates (LS1 rear brake mod)
http://www.thirdgen.org/techboard/br...APA+cables+LS1 (Need Part number for Ebrake cable for LS1 rear brakes.)

and flipped the backing plates side-side. Just cut the cable supports so they bolt on
the opposite side LCA brakets, and used latemodel PBR ebrake cables from NAPA.
(p/n 94264, have to ream the slots on them slightly)

http://www.eecis.udel.edu/~davis/z28...ls_brakes_web/
http://www.eecis.udel.edu/~davis/z28...t_install_web/

hth
mike