Brake BoardLooking to upgrade or get the most out of what you have stock? All brake discussions go here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
The Tee fitting at the back of the car, anyone know what size it is that the inlet is from the 1/4" line? is is inverted or bubble flare? and thread size?
__________________ YOUR 90-92 CAMARO TACHOMETER BROKE? I CAN FIX IT. PM ME FOR DETAILS. SuperStreet in the making...It's a work in progress.
SBC, Forged internals, 215cc aluminum heads, 90mm TB, .589/.612 lift cam, Long tube headers, 3.5" exhaust. 9" Procharger. Powered by Holley HP EFI
I can't seem to locate a bubble flare-er
Link me ?
Local auto parts stores are retarded ( I work at one)
and summit was no help.
----------
Even if I could locate a 1/4" pre-flared line, that would be sweet, and workable, but alas, 3/16" is all I can find around here.
Last edited by TraviZ; 06-21-2008 at 01:23 AM.
Reason: Automerged Doublepost
this is the one i bought, used it a few times and despite its total cheeeepness it worked great! still have it.
I went through the same thing, you ask the guy at the parts counter for a "bubble flare tool" and they look at you cross-eyed, and everybody i asked at the time told me they were a real beotch to make and the tools were very $$$$.
