You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
1984 Z28 Camaro with T-tops. Car has new GM 91-92 nose,front spoiler,fenders, ground effects still in the black e-coat. Quarters and roof epoxy primered and ready to paint.Hood is also 91-92 Z and I still have the original 84 hood if someone wanted it.The t-top area is stripped and ready to prime and paint so you would need new weatherstripping.Motor is original with 174xxx miles on it,starts runs and idles great, just a little smoke on start up. Its done that since I got the car with 74xxx on it.Still have the dual snokel air cleaner.Transmission is a 700r4 and was rebuilt at 75xxx with Art Car components. Rear axle is 3.73 open with drum brakes. New rotors,bearings,pads on the front,pst bushings on the front end.Interior is also stripped of the carpet and old plastic. I have both black and grey plastic for it but no carpet.Also have 91-92 black/grey seats. Stock radio and speakers. Has a grant billet wheel and but I still have the stock one if needed.Also have spare 7.5 axle. Included is a 355 late model hyd-roller 2 bolt short block out of a 87 cop car. Motor is bored .030 with Keith Black flat top pistons,spreed pro rings,clevite bearings,recon rod with arp bolts.Has Arp main studs on main caps.Manley hi volume oil pump. To build this short block again would cost over 800 dollars.Compression with 64cc heads would be 10.3:1-10.6:1 depending on gaskets.Asking 1700 obo ,car does start and drive but I would trailer it home. Pics available.
First off, can you send pics to dyed@wustl.edu? Also, I may be in the KC area around the 25th, would I be able to see the car then? Lastly, I really don't have any particular need for another 350. What would you want for it without the spare motor?
Ok, Thursday will be in KC. Would really like to see this car... Though for that to happen would require actual communication.
If you happen to see this before about noon, mail me at the above address.
Hey, wish I'd have known tihs was still available. Just picked up a red one out of wisconsin. At any rate, I know a guy who is interested and wants to know if you would consider a trade for firearms. For my part, what he has in mind is worth well more than your asking price.
David
Have him send me a list of what he has in mind and i might consider it. Firearms are one of my new hobbies. I have a problem not buying new ones. Very addicting hobby.
This are some older pictures. I have since strip the tan interior out of it and the black epoxy primer has been coated with PPG top coat primer. It has been wet sanded and ready for paint. The doors and hood are the only parts left to strip and primer. I loaded up the pictures to here
For the most part, I started prepping the ground effects for paint and painted the block Chevy orange. I go over and start it every once and awhile. I bought a Ducati Monster and a Nissan Xterra that have been my "toys"
