You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
1991 camaro with only 20 miles on new 383,car went a best of 11.61 @ 118 on motor. Don't want to sale but moving and have no choice.
here is a list of all parts....
350 4 bolt block
scat 3.75" stroke crank
summit stage 2 5.7 rods
speed pro forged flat top pistons 10.5to 1
clevite77 bearings
dart pro1 aluminum 200cc 64cc heads with 2.02/1.60 valves
moroso 7&1/2 qt oil pan with built in crank scraper and windage tray
msd probillet mechanical advance distributor
msd 6al
edelbrock rpm airgap intake manifold
AED holley 750 dp carb
hooker super comp lt's that have been ceramic coated
b&m turbo 350 trans
jw 3500 stall
10 bolt posi rear with 4.10 gears
3 in. flowmaster true dual exhaust
holley blue electric fuel pump with regulator
northern aluminum 2 core radiator with aluminum fan shroud and 16in. electric fan
auto meter gauges and tach
hurst promatic 2 rachet shifter
15 by 8in center line tel stars on rear and 15 by 4in on front
275/60/15 bfg drag radials on rear and m/t sportsmans on the front.
harwood 3in. cowl hood "pin on"
1.6 ratio roller rockers
comp xe 294 hydralic cam shaft
roller timing chain
fresh paint on car
Car is fast it went 11.61 at 118 untuned on a friday night with bad track prep tried to make another pass but could not because did not have roll bar.
Dont really want to sale car, spent alot of money and a ton of time getting it to this point, but am moving out of state and can't take it with me. Car dosent have interior installed but do have all interior.
I know i am forgeting some parts but will list them later.
asking $4500 Will also trade for toyota 4x4 truck or nissan hard body truck. here are some pixs. if interested call 407-470-0611
not to be a jerk, and i know your only looking for people that want to buy your car, but you were asking 4500 from the first post, you said 4500 obo, but you had 6500 in the engine alone, just thought id point it out that might be why people were not looking to buy your camaro.
not to be a jerk, and i know your only looking for people that want to buy your car, but you were asking 4500 from the first post, you said 4500 obo, but you had 6500 in the engine alone, just thought id point it out that might be why people were not looking to buy your camaro.
look at the bottom of the post box, you will see "last edited......yesterday".. that means he changed something.. most likely the price since most people only read the first box anyway..
good luck with the sale
EDIT: see the thing at the bottom of my box?? well anyway mightymouse, i though you only need a rollbar at 11.4's or faster.. read the rule book.. every car that races on a track MUST have a rule book.. a 2007 rule book.. 11.49 or faster is minimum roll bar, not cage..
__________________
1984 Trans Am
385sbc(RIP)/t-5/4.30-9"
1.69-7.44-11.65 @ 116
next up-->383 with mild upgrades
that was a old pic, i have since put the darts on it and the holley back on it,it went 11.61 with the edelbrocks and the holley. the darts are brand new zero miles on them, just installed them about 1 month ago, as for the carb in the pic it is a edelbrock i only put it on the intake while is was having some work done to the holley. I don´t know what it will run with the pro1ś but im sure it will run quicker than the edelbrocks did!!! I will post some newer pics in about a week when i get back from vacation.
just noticed something.. if youre runnin roller valve springs, you cant run a hydro flat cam.. it has to be a solid roller.. you will run that cam flat in a few days.. not sure if the comp XE lineup is roller or not..
just looked up the part number on the heads and they came with the flatt tappet springs and not the roller springs. Looked at the wrong part number when i got all the info on the heads.
Last edited by mightymouse383; 08-14-2007 at 01:05 PM.
Reason: wrong specs
just noticed something.. if youre runnin roller valve springs, you cant run a hydro flat cam.. it has to be a solid roller.. you will run that cam flat in a few days.. not sure if the comp XE lineup is roller or not..
quit ****ing tire kicking *******. bump for nice *** deal.
__________________ 86 Omni GLHT non vtec. almost stock.
turbonetics 50 trim and some bolt-ons.
If I sold my Landrover discovery, I would be interested for sure, unless you want to trade even up. Where you moving to , just curious. Thanks Les
Awesome car by the way
bump for nice *** deal. 
