83 z28 camaro super clean $15,000.00 firm - Third Generation F-Body Message Boards

monsooni · 09-04-2008, 10:13 AM

I have a super clean 83 z28 for sale, it has been appraised for $23,000.00 papers to prove it, it is loaded with high dollar equiptment, most everything here is brand new including the motor, that was built by a professional. You will not find a cleaner 3rd gen car, you could eat off the bottom of this car it is so clean. If you like 3rd gens then this is the car for you. I am located in Plainwell, michigan, phone number is 269-744-7379 call me if you are serious and have the cash. My name is Dwayne thx for looking. Here is more info and items on the car like i said brand new equiptment and motor done right
weld pro star rims
m/t street ets
extra set of chrome rims with like new street tires
wilwood brakes 6 piston rears
braided stainless brake lines
hurst line lock
welded frame rail connectors done up right
Koni adjustable struts
hodgkis rear sway bar
hodgkis adjustable panhard bar
hodgkis adjustable torque arm
Mosher 9 inch
456 gears, possi
35 spline axles?
turbo 350 tranny built to hold over 600 hp
coan converter 3200-3500 stahl
drive shaft hoop
fram fuel filter with rear shut off
holley blue electric fuel pump
holley regulator
braided stainless fuel line all the way up
MSD 6 al box
msd billet aluminum distributor
msd 8.5 mm plug wires
billet aluminum wire loom
msd blaster 2 coil
painless wiring with fuses nd relays
moroso switch panel
high torque starter
autometer monster tach with recall and shift light
autometer fuel gauge
autometer oil gauge
autometer temp gauge
b-m shiter with line lock button
tranny cooler
front end completly redone k member spindles, arms etc blasted and powder coated
new mouge ball joints
hodgkis tie rod adjusters
energy suspension motor mounts
energy suspension a arm bushings
energy suspension ball covers
manual steering box
ae fittings everywhere
motor
350 .040 over 4 bolt main
hooker super comp headers ceramic coated
warlock mufflers the ones you can open up
stainless header bolts
felpro gaskets
victor jr intake port matched and polished
750 quick fuel race carb
k-n filter expensive
aeroquip fuel log
stainless car studs
proform aluminum valve covers
new style afr eliminator 195 aluminum heads with upgraded springs
afr head studs
stainless intake bolts
billet aluminum distributor hold down
billet aluminum csr electric water pump
billet aluminum alternator bracket high dollar
stainless water pump bolts
ae pistons 10-1
scat crank and rod balanced
red top optima battery
comp cams hydraulic roller cam 570 lift
comp cams lifters
heavy duty push rods
crane roller rockers
milodon high volume oil pump
milodon 7 quart oil pan with windage tray
billet aluminum timing chain cover
motor about 500 hp full roller motor
for more pics and info visit http://cardomain.com/ride/3084098

monsooni · 09-08-2008, 05:51 PM

Quote:

Originally Posted by monsooni

I have a super clean 83 z28 for sale, it has been appraised for $23,000.00 papers to prove it, it is loaded with high dollar equiptment, most everything here is brand new including the motor, that was built by a professional. You will not find a cleaner 3rd gen car, you could eat off the bottom of this car it is so clean. If you like 3rd gens then this is the car for you. I am located in Plainwell, michigan, phone number is 269-744-7379 call me if you are serious and have the cash. My name is Dwayne thx for looking. Here is more info and items on the car like i said brand new equiptment and motor done right
weld pro star rims
m/t street ets
extra set of chrome rims with like new street tires
wilwood brakes 6 piston rears
braided stainless brake lines
hurst line lock
welded frame rail connectors done up right
Koni adjustable struts
hodgkis rear sway bar
hodgkis adjustable panhard bar
hodgkis adjustable torque arm
Mosher 9 inch
456 gears, possi
35 spline axles?
turbo 350 tranny built to hold over 600 hp
coan converter 3200-3500 stahl
drive shaft hoop
fram fuel filter with rear shut off
holley blue electric fuel pump
holley regulator
braided stainless fuel line all the way up
MSD 6 al box
msd billet aluminum distributor
msd 8.5 mm plug wires
billet aluminum wire loom
msd blaster 2 coil
painless wiring with fuses nd relays
moroso switch panel
high torque starter
autometer monster tach with recall and shift light
autometer fuel gauge
autometer oil gauge
autometer temp gauge
b-m shiter with line lock button
tranny cooler
front end completly redone k member spindles, arms etc blasted and powder coated
new mouge ball joints
hodgkis tie rod adjusters
energy suspension motor mounts
energy suspension a arm bushings
energy suspension ball covers
manual steering box
ae fittings everywhere
motor
350 .040 over 4 bolt main
hooker super comp headers ceramic coated
warlock mufflers the ones you can open up
stainless header bolts
felpro gaskets
victor jr intake port matched and polished
750 quick fuel race carb
k-n filter expensive
aeroquip fuel log
stainless car studs
proform aluminum valve covers
new style afr eliminator 195 aluminum heads with upgraded springs
afr head studs
stainless intake bolts
billet aluminum distributor hold down
billet aluminum csr electric water pump
billet aluminum alternator bracket high dollar
stainless water pump bolts
ae pistons 10-1
scat crank and rod balanced
red top optima battery
comp cams hydraulic roller cam 570 lift
comp cams lifters
heavy duty push rods
crane roller rockers
milodon high volume oil pump
milodon 7 quart oil pan with windage tray
billet aluminum timing chain cover
motor about 500 hp full roller motor
for more pics and info visit http://cardomain.com/ride/3084098

ran the car last night ran great 11.70 et at 118 mph and 1.55 60ft time thx

j88l98irocz · 09-12-2008, 02:40 PM

Quote:

Originally Posted by monsooni

ran the car last night ran great 11.70 et at 118 mph and 1.55 60ft time thx

looks really nice. free bump

P.S whats the back spacing on those weld wheels?

DCOWBOYS1975 · 09-12-2008, 03:24 PM

That is exactly what I want my 83 to look like!!! BADASS. This is not a free bump however. This is a $15,000 bump sign the title and I will be over to pick up my car!!! LMAO.

Trey

GO COWBOYS!!!!!!!!!!!!!!!

monsooni · 09-13-2008, 09:48 AM

bring the cash and i will have the title in hand , thanks for the compliments

monsooni · 09-23-2008, 09:43 AM

NEW PRICE ON THE CAR WILL SELL FOR 14,500.00 THX IF YOU ARE AT ALL INTERESTED IN IT YOU NEED TO LOOK AT IT I GUARANTEE YOU WILL BUY IT MUST SEE

arowrock · 11-02-2008, 12:33 AM

nice car man... wee bit pricey though. another 10 g can get an 08 camaro

monsooni · 11-02-2008, 05:20 AM

thanks, anybody can buy a new camaro, this is a third gen like the sight says. And there are not very many third gens in this kind of shape, I guess you need to appreciate the older cars.

arowrock · 11-04-2008, 12:10 AM

Ya that be a nice set up... Old school is nice... Looks mint..
You mention in above ad
"motor about 500 hp full roller motor
for more pics and info visit http://cardomain.com/ride/3084098"
but according to cardomain you say "Line loc, motor has about 525 HP". Do you have Dyno Papers to verify 500hp or 525?. What is the tourqe? What is the peak RPM level for HP & TRQ at according to Dyno papers? Might be ineterested if you consider moving in price!

monsooni · 11-04-2008, 08:59 AM

motor has never been dynoed, The engine builder has built many many motors of this combination that have been dynoed, and they were in the 500 range. SAME equiptment , same guy doing machine work etc, I had no reason to dyno it. There may be a little room to move on the price not much thx