You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have an 86 Camaro that started life as a Hard top coupe. Then I got a hold of it and Turned it into an IROC clone. Painted it plymouth prowler silver. Its really a sharp camaro.
MOD LIST!
Chassis:
Hotchkiss weld in sub frame connectors
Competition Engineering Roll Cage
Sphon Adjustable torque arm
GM wonder bar
Hotchkiss Tubular panhard bar
Lakewood Boxed Rear control arms
lowering springs
aftermarket sway bar
Drive Train
Engine:
Fresh 383 1 pc rear main seal
Eagle rotating assembly
Srp dished pistons
world product SR torquer heads 2.02 1.60 stainless valves
crane 1.5 gold race roller rockers
new roller lifters
no camshaft
msd wires and billet distributor
Engine has never been fired
If it doesnt sell i plan on taking it to the machine shop and having the block splayed, balanced, bluie printed, to get it ready for the turbos.
I have a 7qt moroso oil pan, and all kinds of billet to dress it up.
Transmission:
700r4
Built with all the goodies
corvett servo
Transgo internals
2500 stahl converter
built to hold 400hp
only 2000 miles on it
This will not hold up to the turbo set up.
Rear End:
Moser 9 inch built specifically for a Thridgen camaro 3:70 gear ratio
12 inch drums in the rear
0 miles!
Induction and fuel:
Brand new T3 T4 hybrid turbos
stainless steel headers
3 inch Intercooler
Everything you need to go with the turbos
255 lph pump already in the tank
TPI with 30lb injectors
Siamesed runners
ADJ FPR
BBK 52mm Throttle body
Brains:
Accel Calmap computer complete with harness and wideband O2 sensor
Interior:
Dodge Viper Seats Suede Centers and Leather
corbou racing belts
New carpet
Panels are in nice shape
Wheels:
Centerline Daggers 17x8s in the front 17x9s in the rear Kumho Ecsta rubber
Set of weld Drag lites also.
Alot of these parts are Brand new or near new. There is no junk hear! what needs to be done...
Finish Engine build, Find a suitable tranny, Install engine and trans , Weld up exhaust, hook up brakes, paint roll cage, Install interior, Tune the FI and Turbos.
Asking Price $ 12,000.00 for all o.b.o
6,000 as a roller
I cannot ship due to all the pieces.
to give you an idea of what you get the seats, rear end, and wheels cost 5,000 alone.
Email me for pictures and Info at irocz86350@hotmail.com or come check it out! Thanks, Kenny
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
