You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I started the process to begin a drag car but some things came up and I have to move. This is a project car, and is no where near complete, there is no motor or trans. It will not be a street car as the bumper supports and all factory wiring were removed.
The car is a t-top car. It has weld draglites on it with skinnies. The rear tires will need to be replaced. It has a 10 bolt 3.42 posi w/ rear discs out of a 4th gen. It has a 4" harwood lift off cowl hood. It has spohn lower control arms, and panhard bar. It has brand new summit racing 50/50 shocks in the back. Battery relocation to the trunk with a cutoff. It has 2 black summit racing seats with it that are not mounted yet. It comes with a couple sets of some of the interior panels. I was going to choose the best parts and paint them with the interior paint, I have a couple already painted that you can see how good they come out as well. I have roughly did the body work on the car and primered it black. I also cleaned and painted the engine compartment. The heater core hole was filled also. There is not any carpet as I was going to just use black carpet from home depot since I wasn't going to have a backseat or anything. I have made a switch panel and wired up some of the wires for turn signals on a switch, the lights, ran wires for fuel pump, fans, gauges, waterpump, nitrous, push button start, etc etc. The car needs many many things and is rough. This is a PROJECT. There is no motor or trans with it either. Please understand what are you looking at before you waste both of our times, not trying to sound rude, I just want to make sure you understand this is a PROJECT CAR.
CASH ONLY NO TRADES Price is firm. The wheels and hood alone almost make this a good deal.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ 1986 Camaro - Project White Trash
talk is cheap motherfukker if you're really feelin froggish leap
Sponsored Links
Registered users do not see this ad. Click here to register for free!
