86 iroc roller WITH GENUINE GM KNOTCHBACK!!! (also 350 parts and engine) - Third Generation F-Body Message Boards

lopezisgod · 10-18-2009, 09:53 PM

i have an 86 TRUE iroc car.. not a clone but has a genuine GM knotchback.. not no knockoff .. still has vin sticker on underside

originally a 305 carbed with 5 speed

now has no trans and a 355 motor.. motor not installed..(not included in price will be 500 more).... motor has 1700 on it.. its a short block now.. disasembled for different head setup and lost intrest

car is a t-top car... with a striped interior.. started to put back together

no carpet, was removed for ROLL CAGE (that comes with car) to be put in.. smelled

car originally red... but spray bombed flat back.. interior too.. most of all plastics there as well as door panels.. ALL FROM FIREBIRD.. black and grey door panels.. with black plastics..

dash is all there

center console there.. (tan carpet sides)

has 2 sets of rims.. the ones that are on.. black iroc 16 rims with new michelin tires

and a set of 15 in camaro rims.. that are decent.. need new tires on them.. ones on are shot

has a firberglass daytona iroc hood.. with NO cutouts on the side... still stolid.. (hood painted green)

as said before comes with a 8-point roll cage from S and W Racing

comes with 2 extra fenders..

has a griffin aluminum radiator.. for an 3rd gen camaro with electric fan on radiator

also has solid engine and transmission mounts..

brand new battery relocation kit from summit

2 poly racing seats with sliders (one has cover other dosent) with 4 point harness's

has 2 sets of t-tops.. glass and poly

car needs some work.. was gonna turn into drag car..

HAVE TITLE IN HAND!!!

looking for 1500 for everything except the motor OR BEST OFFER!!!

i do not have the funds to keep the storage unit i have it it so i need to sell

WILLING TO PART!!!>. MAKE offers on parts u want

i would let the car go for 2,ooo or best offer with the motor as welll

also have stuff extra not included with car (unless you would wana work out some sort of deal)

i have a set of edelbrock aluminum performer rpm heads with the same amoutn of miles as the motor.. (as do all the parts) for 800 OBO

mallory aluminum distributor

1.5 FULL roller rockers

brand new summit bracket racing harmonic balancer(new in box)

edelbrock carberator .. 750 cfm (i think..forget numbers.. can get if needed )

AS SAID BEFORE NEED!!!!!! TO SELL!!!!!! MAKE OFFER!!!!!!!!!!!!

allparts are offer based.. try me.. just need to get rid. of

This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!

92 Formula · 10-19-2009, 02:38 PM

I may be blind, but I didn't catch a location in your ad. Per board rules please post your location by either editing your title, adding it via a post or going into your USER CP and adding it there. If I simply missed it I apolgize in advance.

Good luck on your sale.

lopezisgod · 10-19-2009, 08:56 PM

My bad just outsiDe Allentown pa

305forever · 10-20-2009, 11:26 AM

hey i live in nazareth,pa i would like the fenders the seat and the hood. thanks

lopezisgod · 10-20-2009, 06:17 PM

Offer?

305forever · 10-20-2009, 08:45 PM

well im not good at making offers just give a price ill prob like it

mistercamaro92 · 10-21-2009, 12:38 AM

will u sale he roll cage????

WIll36 · 10-21-2009, 01:15 PM

possibly interested in radiator. Is it for an automatic or manual setup, what's the thickness since they offer several and would it be possible to get the part # and pictures. Also interested in the solid mounts and battery relocation kit. I would like pictures and part numbers on all of it. wcs13@aol.com

Z2887 · 10-21-2009, 01:36 PM

Im right at the MD line. You have pics ? mark.burgess@citi.com if you do. Interested in that shortblock, and heads too. What can you tell me about it ? what kind of pistons,ect. ?

What will you take for the cage ?

lopezisgod · 10-21-2009, 10:11 PM

cage 200 obo.. plus shipping( 350 new plus shipping.. was never even unstrapped from original shipping)

radiaor is for an auto.. but oviously work for manual as well... 3 inch thick.. no pics unfortunally

... still has the griffin blue paint on it.. 200 obo

solid mounts would be 60 bucks for all 3... as they are new.. and cost 65 alone for the motor mounts..

bat relocation i would take 75 bucks for...

fenders on car.. or the extra ones .. forgot to mention the extra fenders are for driver side only.. one is a firebird one.. and another is a brand new Taiwan fender... .. so both extra fenders?... and hood and poly seats.. with 4 points?
want 300 for hood... 60 for seats and harness's... and fenders 50.. soo..say 375 for all..?

short block info:

2 bolt main... old style 2 piece rear main..
350 30 over (355)
hyperuntecnic pistons...
crank and rods are not new but ok were looked over by machine shop and all journals were polished with new bearings..
has litterly less then 1700 miles.. i had it running.. ran through break in.. drove it.. not beaten on.. pulled apart due to change in engine build plans ( was gonna turbo ).. then lost intrest..
panted Chevy orange..
have all the brackets for alt and p/s ..

heads are edelbrock performer rpm heads with same amount of miles...
had guy i know do a NEW 3 angle valve job on it.. ( take to a edelbrock guy said there jobs from factory sucks and recommended a experiences machinist do them over)
they have the chambers cleaned up a bit ... not fully polished but cleaned up really well
NO MILES ON THEM since the valves were redone... STOCK rings and valves that came on the heads when bought them..

i have a new summit harmonic bracket racer balancer that has never been installed before.. new in box as well..

also have the push rods that i had with the setup(will through those in)

also have 1.5 full aluminum roller rockers..

. .. will even deliver if need be

let me know.. willing to make deals if you guys want more then one thing..

thx for the intrest

WIll36 · 10-22-2009, 08:01 PM

I'm only looking for a MT radiator but I would like the part numbers on the solid mounts and battery relocation kit.

lopezisgod · 10-22-2009, 09:49 PM

u do know the ONLY difference between the manual trans rad and auto rad is the cooler built in.. there is vutually no difference between the 2.. wont effect cooling..

the mounts are umi performance solid mounts.. sell for 65 new.. plus ship

its the batt location box kit...is the one at this link...
http://www.summitracing.com/parts/SUM-G1200A/

let me know..

WIll36 · 10-23-2009, 01:03 PM

Yes I'm very aware of the MT vs At radiator difference. I'm not interested in having unused fittings on the side of the radiator to make the enginebay look like crap. As far as the other stuff goes if your only knocking 5 bucks off of the price new I'm just not interested.

lopezisgod · 10-24-2009, 01:44 AM

aparently you dont know how to read the english language...

its says 65 for all 3!!!! if u read what is says.. it means 65 for the solid motor mounts and SOLID TRANS MOUNT!!!.. MEANING 3!!!!

dang · 10-24-2009, 04:26 PM

how much for the roller w/o the extra racing stuff, motor, or hood?

lopezisgod · 10-25-2009, 08:05 PM

... roller without the 16" rims and tires? 500 bucks (has 15 iroc style rims.. need to be redone?

.. thats a roller WITH NO : carpet, cage, racing or engine parts, no rear decklid, no radiator, no trans and motor, ...

well bascially a set of rims and tires that need to be redon/replaced... a body and 2 sets of t tops..

let me know... thats .. u give me 600... we go transfer the title.. u take car with you...

thx

brian

matchbox · 10-25-2009, 09:03 PM

got any pic's of the car

lopezisgod · 10-25-2009, 09:10 PM

working on pics this week... should have them up soon ..

will do my best to get them as soon as possible..

(would of had this weekend.. but had issues on my brake system on my other camaro

.........)