Yahtzee

Gauging interest on my 89' IROC-Z Camaro. I do NOT have to sell it, just putting it out there in case someone wants it for a price that I am satisfied with.

SPECS

CAR
1989 Chevrolet Camaro IROC-Z28
Hardtop
Originally an L98/700r4
Had 89,000 ORIGINAL miles on it when the swap was done. I did not have a speedo for about 6 months after the swap and the new Autometer 5" speedo reads 2550mi. So around 100,000mi on the car.
Has a custom Jet black paint job professionally done in FL. Has cyber gray ghost stripes and flames on the hood. Professionally tinted tail lights, side markers, park lamps, and emblems done by body shop. Paint job alone was over 2k.
All lights, blinkers, fog lights WORK. The only lights that do not work are the reverse lights.

ENGINE
1999 Corvette LS1 Stock Bottom end and Heads besides the following
TSP MS3 Camshaft specs are 237/242, .603"/.609" 112
PRC double valve springs, locks, and titanium retainers. Good to .650" Lift.
GM LS2 timing set
GM LS6 intake manifold, fuel rails, injectors and throttle body
Professional Products 25% under drive pulley
Custom cold air intake made by me
GM LS1 valve covers, coils, plug wires
Edelbrock 4th gen F-body Shorty Headers ceramic coated NO AIR OR EGR
Custom 2 1/2" Y pipe into a Hooker aero chamber 3" cat back with 3" manual cut out
Hawks LS1 conversion fuel system including Racetronix 255lph in tank pump with "hot" wire harness.
Custom stand alone engine wiring harness adapted to the third gen chassis harness
Hawks AC delete shroud
Hawks LS1 conversion Motor mounts, Prothane engine side mounts.


TRANNY
2001 Camaro SS T56
Professionaly rebuilt by scoggin dickey performance
Ram steel flywheel
Ram powergrip HD clutch BRAND NEW
GM slave cylinder
Ram adjustable master cylinder
4th gen pedals
Pro 5.0 Shifter with Lou's short stick
Stock 4th gen Hurst shift ****
2001 Camaro torque arm
2001 Camaro aluminum driveshaft with 1350 conversion U-joint
Prothane torque arm and transmission mount
Hawks LS1/T56 conversion crossmember

REAR
Moser 9" rear. Backbraced, 3.50 gears, Auburn Posi, 31 spline axles, nodular Iron Center section.
4th Gen length
Factory rear disc brakes
BMR Chromemoly LCA's
BMR Chromemoly PHB
Spohn rear sway bar
Spohn LCA relocation brackets welded on.
The car has Ground control weight jacks on all 4 corners and it looks awesome!

WHEELS AND TIRES
OE replica C5s Flat black with polished lip.
FRONT-17x9.5 with Nexen 275 40 17s
REAR- 18x10.5 with 295 30 18 Pilot sports
2.25" Billet wheel adapters on the front

INTERIOR
Stock 3rd gen seats with gay seat covers, NO BACK SEAT
Brand new gray interior plastics (Not just painted, they are the actual correct color)
4th gen seat belts
Grant steering wheel
2 12" MTX subs in custom box that matches carpet. It looks real good. 250W Kicker Amp.
Complete Autometer PRO-COMP gauge set-up
5" In dash Tach
5" In dash electric speedo
2 5/8" Fuel gauge
2 5/8" Mechanical liquid filled Oil pressure and Water Temp
2 5/8" Voltmeter

Almost everything works inside the car. All interior lights work pwr windows and locks work, pwr mirrors work but the switch is broken.

THE BAD
The car has it's small quirks just like all cars do, but I can tell you this, I drive this car hard all the time and it never complains. I won't lie to you, I built the car to be driven hard. I drove it 800mi one way, raced it for 2 weeks, drove back 800mi NO PROBLEMS

And it even got 26mpg on the highway!!!!
The car cruises at 1900rpm in 6th @85mph.

I have absolutely EVERY receipt for the parts installed on the car.
I am asking $12,000 FIRM.
Give me a call or text or shoot me an email if you are interested. Car is located in San Diego CA.
Sean-505-234-4930 Bykrdood7@aol.com
Thanks for looking.

Idle, Rev video.
http://www.youtube.com/watch?v=Uw9Y3RJU6tI

Yahtzee

Yahtzee

Yahtzee

Grifter757

iTrader: (5)

Nice car. Wish you were closer and i could get ride of my 91 Vette. GLWS

Yahtzee

Thanks man. BUMP!

BIJANScamaro

email sent

Yahtzee

Replied!!!

itsMikey

saw this camaro in person..lemme just say, this thing is absolutely sick..showstopper fer sure

Yahtzee

Thanks Mike!!!


FIRST POST UPDATED!!! NEW MOTOR NEW CLUTCH

itsMikey

noproblem bump...sorta

hydrolic144

iTrader: (2)

NOOOOOOO!!!!!

Showcase1186

iTrader: (1)

Cool car. Not sure why you don't finish it and keep it... Just needs some TLC and attention to detail. It's close. Free bump.

383fbod

iTrader: (2)

Holy wheel gap batman! nice car thoe! That lightweight LS brings the need for some spindles

thirdgenSS

iTrader: (1)

are you in military? i think i met you a few years back in columbia sc. i drive a white 91 z28 with ghost stripes just like yours lol maybe you'll remember it

CamKid1992

no more knock?

Yahtzee

Holy **** whats up man!!! Haha yes I remember you, Hows the car?? Im still not 100% sure Im selling, and I have had very little interest so, I will probably end up keeping it.

No sir, this new motor runs like a watch!!! Box stock plus an LS6 intake manifold, and edelbrock shorty headers. Runs perfect.

thirdgenSS

iTrader: (1)

its still hangin in there lol almost 200k miles on the the stock 305. waiting on something to happen so i can play with my motor lol. ls swap looks sick! wish i was closer id love to give this thing a good home!

CamKid1992

Asking price still the same?

Yahtzee

I lowered it from $10k to $8500.

CamKid1992

im very interested. in the process of getting a 94 b4c on a trade for mine and hope you still have yours for when i sell it. which will be soon. ill be making a trip out there.

10secondhopeful

Saw you on ls1tech a couple days ago on a thread with a guy selling a blue '92 383ci, nice car man, if you weren't two and a half large states away I'll love to take her off your hands . bump for a nice 'maro

escalations

still have the car? still asking 8500??

Yahtzee

Yes I still Have the car but it has gone through some changes since I updated this thread. I will update the original post with my new price and let me know if your still interested.

escalations

updated pics would be great as well...thanks

Yahtzee

Updated

escalations

thanks for the update. the drivetrain sounds solid but I'm not really interested in something that someone drives hard day-in and day-out. And for 12,000, I'd be looking for something a little more "finished" is how I'd put it I guess. Good Luck with the sale though.

BlueZee28

iTrader: (30)

This has me really confused...what is it about the car that doesn't look "finished" to you? It's amazingly clean, the swap was done with nice attention to detail, the wiring is all tucked up neatly and not thrown over the engine bay like a rats nest, the entire drivetrain has been upgraded with excellent parts, yet doesn't look finished?


Bump for a SICK car

escalations

i didn't say it wasn't clean or anything. to me, it's just not finished to my taste. which is why i wrote "finished" in quotations. for me to justify spending 12 grand i'd want it to be perfect for me, that's all.

sambo88

You americans are so spoilt for choice of nice cars! this car in Australia would fetch about $30k+. If only it was an 88 id snap it up in a second (silly aussie rule about post 88 cars making it very tricky to import). 12grand is a BARGAIN! GLWS

Brisk

iTrader: (25)

great lookin car.. I've been dreaming of an lsx swap

toxik IROC

iTrader: (12)

Would you be interested in a trade?

90IROC1

iTrader: (4)

I really think your car is sik, I want to do a ls swap in my bad. If you don't mind me asking did you do the swap or have someone do it?

TTT for an awesome car.

Yahtzee

Your welcome, and thank you for the interest.

Thanks Nick!

Haha thanks man. Just move to America!!!

They aren't tough to do if you know much about these cars and the internet lol.

Maybe. Depends on what for.

Thanks. I did all the work myself. You can find my original build thread on here somewhere.

Still no serious offers. I might be putting the 383 LS back in it with some boost....

CamKid1992

If you swap it with the 383 and boost it I want it. I'll trade you my 4th gen

RubberDucky

iTrader: (4)

This is one of the best looking cars on here. Where did you get the tail light covers?

My fav pic of it.

toxik IROC

iTrader: (12)

Why do the tail light not work. Also what brake pads are on the car can you post.some not.interior.photo please

Yahtzee

The tail lights work fine. The reverse lights do not work though. Stock brake pads from auto zone. I will get some more pics of the interior tonight.

Yahtzee

Bump
Updated with all new pictures....

blakecharles

holly ish!!!
This car is so clean it's not even funny....
If I had not already spent 8500 on my current swap, I would deff buy this car... You have almost all the same parts down to the rims

Yahtzee

TTT Car will be at LA invasion this weekend for track times.

dippin88

would you be willing to part with the wheels? or know where i can find a set for a the low price
and im also doing this swap into my car but the tranny being stubborn and cant get it to line up with the engine properly any suggestions?

Yahtzee

OEWheels.com


As for the trans problem, T56 or Auto?

superirocz

iTrader: (5)

If you were closer to PA you would have a check today.

FSTFBDY

iTrader: (33)

You guys who will drop the 12k for the car penny up ad spend the exta $1200 to have it shipped.

If I was in the market for a lsx3rd Gen this one would be up there on the list. Fell little attention to details and it would be perfect.(hide some more wires, new dash pad)

nice car man. Ive considered getting rid of my boosted 383lt1 for a lsx build.

toxik IROC

iTrader: (12)

fly out and drive it back! great way to learn the car than have seat time for a cross contry trip!

bump for awsome car.... only if you wanted a jeep...

dippin88

How much they go for on that site... T56

Yahtzee

If any of you long distance guys are actually serious about the car, we can definitely work out a deal. PM me if your serious.

As for the wheels, they were $527+shipping for the set.



BTW the car now has a full interior. Ebony/grey dual pattern cloth 4th gen seats. In perfect shape.

Yahtzee

Updated interior shots added.

B2daRAD12

Is this car still for sale?