06-15-2009, 07:02 PM
#1 Junior Member
Join Date: Jun 2009
Posts: 16
WTB: Black coupe
looking for a black third gen camaro. must run atleast 12's, must be black. that is all.
email me at MwWhitte@yahoo.com , i live in bartlesville, OK. i know i'm a "newbie" on here but i'm on cobaltss.net aaaaaaaaall the time. check me out if ya want, same user name.
the more modded it is, the more likely i will buy it.
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
06-15-2009, 11:27 PM
#2 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
06-16-2009, 03:02 AM
#3 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
06-27-2009, 02:15 PM
#4 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
06-30-2009, 07:41 PM
#5 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
07-05-2009, 03:26 PM
#6 Senior Member
Join Date: Aug 2007
Location: Southern Wisconsin
Posts: 1,341
Car: 1988 Camaro
Engine: 383 Stroker
Transmission: Probuilt 700 R4
Axle/Gears: 3.73
Re: WTB: Black coupe
whats are you looking to spend?
__________________ 383 Forged Stroker. Splayed 2 bolt mains, TPIS Miniram, ZZ409, Probuilt 700r4, Dart 200cc Alum Heads, 3500 Stall, 12 bolt 3.73, Dyno Dons Headers and Y, Spohn suspension, relocated battery, 3.5 inch cutout, custom 4 inch custom airbox by 1bad91z ,3 core radiator, stage 2 stewart water pump. 11.64 at 115 with 1.53 60ft
07-05-2009, 04:15 PM
#7 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
07-06-2009, 10:08 AM
#8 Senior Member
Join Date: Aug 2007
Location: Southern Wisconsin
Posts: 1,341
Car: 1988 Camaro
Engine: 383 Stroker
Transmission: Probuilt 700 R4
Axle/Gears: 3.73
Re: WTB: Black coupe
yeah i know, but whats your budget?
07-06-2009, 11:56 AM
#9 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
i don't really have one.
have your rear end Strange gearing problem fixed yet? or the shifting into OD at 39 and shaking?
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
07-06-2009, 04:00 PM
#10 Senior Member
Join Date: Aug 2007
Location: Southern Wisconsin
Posts: 1,341
Car: 1988 Camaro
Engine: 383 Stroker
Transmission: Probuilt 700 R4
Axle/Gears: 3.73
Re: WTB: Black coupe
yep its all fixed, I had to adjust the cables so it would shift properly, and there is a little whine to the rear end, only because I have all new poly bushing all around the car, in addition to a crossmember torque arm mount, all of these tend to transfer noise quite easily unlike the rubber bushings and the old tranny mount. i might be willing to sell if the price is right
07-07-2009, 09:36 PM
#11 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
well...whats the price? any pictures, like..current ones?
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
07-07-2009, 10:21 PM
#12 Senior Member
Join Date: Aug 2007
Location: Southern Wisconsin
Posts: 1,341
Car: 1988 Camaro
Engine: 383 Stroker
Transmission: Probuilt 700 R4
Axle/Gears: 3.73
Re: WTB: Black coupe
first of all where you from, nevermind I see your from OK. Might be to far for a sale
07-08-2009, 01:04 AM
#13 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
you've never heard of driving to get a car? lol
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
07-08-2009, 10:15 AM
#14 Senior Member
Join Date: Aug 2007
Location: Southern Wisconsin
Posts: 1,341
Car: 1988 Camaro
Engine: 383 Stroker
Transmission: Probuilt 700 R4
Axle/Gears: 3.73
Re: WTB: Black coupe
that is quite a ways to go. I will get some pics if your still interested
07-08-2009, 04:01 PM
#15 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
yes please. driving is nothing for me. i drive all around the country during the summer. i'ld just get my truck and trailor and head up there
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
08-19-2009, 08:48 AM
#16 Junior Member
Join Date: Aug 2009
Posts: 21
Re: WTB: Black coupe
08-20-2009, 11:30 AM
#17 Senior Member
Join Date: Dec 2002
Location: Brooklyn, MI
Posts: 300
Car: 1991 Camaro RS
Engine: 355
Transmission: 700-R4
Axle/Gears: 4.10
Re: WTB: Black coupe
Got a 1991 RS hard-top, black w/ red interior. Body 90%, interior 100%. Specs in the sig. Mid 12's. 390hp, 426ft/lbs. Located in mid-michigan. $5,000. Make an offer.
__________________ 1977 350 Block. 2 Bolt Main. Bored .40 over. Hypereutectic Sealed Power pistons, .250 dome. 65cc chamber Canfield 195cc intake runner heads. Mild port and polish. 11.9:1 compression. Hydraulic roller conversion. Comp Cams roller cam .498/.502. Edelbrock Performer RPM Airgap. Holley 770 Street Avenger. MSD 6AL. HEI with super coil.
426 FWHP
450 FWTQ
Last edited by DNSTA; 08-20-2009 at 11:37 AM .
09-23-2009, 03:52 PM
#18 Junior Member
Join Date: Jun 2009
Posts: 16
Re: WTB: Black coupe
wow i wish i would have paid more attention to my thread hahah. is your car still for sale?
__________________ Modified TTR upper mount, OTTP stage2 rotated trans mounts, OTTP dual pass heat exchanger, 2.8" pulley, stage2 belt, NGK plugs, 79lb injectors, R.A.W. 3" intake, Vibrant 3" filter, R.A.W. 1/2" throttle body spacer, AIS trunk mount, 90/10-methanol/water, 10gph@200psi, Hahn header, Hahn 3" downpipe, Hahn 3" catback, 235/40/18 KDW's
09-23-2009, 03:52 PM
ThirdGen
1992 Camaro
Paid Advertisement
Thread Tools Search this Thread
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off