if you really want my opinion paint the door bezel things and handbrake handle black again and loose the steering wheel cover and all that Canadian tire crap (honestly it looks cheep, you aint drivin a honda) other then that looks like a clean car
Honestly, I love the interior of the car. The only thing I don't like is, I prefer to have the seats themselves look that way instead of throwing a seat cover over the current ones. Steering wheel covers, I hate them... but the overall appearance of the interior, I'm really digging it.
I'd like to do something similar with the interior of my TA, but she's silver and I'm trying to stick to a silver/black color scheme with blue glow, like my CD player glows blue and I would like to have the bulbs behind my gauge cluster blue aswell. Just thinking out load...
I am a sucker for "less is more." She's a killer looking ride on the outside, but I've never been a big fan of the cheap-o seat covers and what not. Are the seats in bad shape? If not, I would rock it stock. Otherwise, it's a pretty clean car. Looks good
Will
__________________
89 IROC-Z As seen on TechTV August 2003
*Bone Stock* Dyno 214 rwhp / 312rwtq
14.3@97mph Bone stock pass
ZZ?/AFR180's/XFI268HR13 awaiting trial runs
The seat covers are covering up blue seats out of another third gen, the original seats were in really bad shape so I went to the JY and just got some replacement seats for $20 a pop. So the seat covers are temporary until I find some seats that match the interior.
The steering wheel cover is on there mainly because the stock steering wheels feel really skinny to me so the cover thickens up the wheel for a more comfortable feel.
I don't know, I think I like the painted interior pieces, gives it contrast instead of being all black, and the red is GM81U so it matches the body color. I still have all the original black interior pieces, I picked up extras at the JY so I could switch back if I didn't like the painted look.
dude its your car and noone elses opinion really matters thats just my personnal preference my interior was simmilar to that when i bought it except it was blue and was alot less tastefull, i hated it i got new peices as soon as possible when i got the car home i found a switch under the dash when i hit it the *** pedals lit up im still lookin for some blue door panels tho cuz he cut a hole in em for some 20 watt sparkomatics
My opinion would be To. paint the wheels the same color as the car, not digging the white 2 much, And buy some seat covers from somewhere to get the seats matching the stock interior. Looks good though!
Good looking car, but the painted trim does give it a bit of Rice flavor. Something I think would look good (been wanting to do it to my own) and would match your shifter nicely, is a billet e-brake handle, and billet door trim. Speaking of, does anyone kow of a place that could make that? I've always wanted to replace the door trim and the upper console trim pieces with billet copies.
Good looking car, but the painted trim does give it a bit of Rice flavor. Something I think would look good (been wanting to do it to my own) and would match your shifter nicely, is a billet e-brake handle, and billet door trim. Speaking of, does anyone kow of a place that could make that? I've always wanted to replace the door trim and the upper console trim pieces with billet copies.
now theres an idea i would love to have that in my car
dude its your car and noone elses opinion really matters thats just my personnal preference my interior was simmilar to that when i bought it except it was blue and was alot less tastefull, i hated it i got new peices as soon as possible when i got the car home i found a switch under the dash when i hit it the *** pedals lit up im still lookin for some blue door panels tho cuz he cut a hole in em for some 20 watt sparkomatics
Of course, I'm not changing it just cause someone else doesn't like it, if I like it it stays. Just getting some opinions and ideas on other things to do. Thanks!!
----------
Quote:
Originally Posted by Sonymaster20
My opinion would be To. paint the wheels the same color as the car, not digging the white 2 much, And buy some seat covers from somewhere to get the seats matching the stock interior. Looks good though!
That kinda brings up a somewhat funny story, when I bought the car the guy owned a white camaro and the red one I obviously bought, he switched the wheels cause he thought the red ones look good on his car because it had red interior, and he wouldn't switch them back when I asked so I ended up with the white ones.
I am planning on painting them red when I get the time.
Last edited by Jason1313 : 07-06-2008 at 09:57 PM.
Reason: Automerged Doublepost
Good looking car, but the painted trim does give it a bit of Rice flavor. Something I think would look good (been wanting to do it to my own) and would match your shifter nicely, is a billet e-brake handle, and billet door trim. Speaking of, does anyone kow of a place that could make that? I've always wanted to replace the door trim and the upper console trim pieces with billet copies.
I do like that idea of the billet trim pieces. Does anyone know where to get that done?
Just getting some opinions and ideas on other things to do.
if your looking for ideas on improvement id say get some chrome exhaust tips lower it and get a cowl hood(if your into that kinda thing) the rs camaro looks absolutly sick when it is slammed to the ground
if your looking for ideas on improvement id say get some chrome exhaust tips lower it and get a cowl hood(if your into that kinda thing) the rs camaro looks absolutly sick when it is slammed to the ground
I am planning on getting some exhaust tips when I get a cat back put on to start with, and then eventually replace the whole exhaust. I don't care much for the cowl hoods but thanks for the suggestion. As far as lowering it, I scrape the bottom of the front lip enough as it is, and I'm allready paranoid when I go to park about hitting the wheel stops, I can't imagine how much it would scrape and how much more paranoid I would be if I lowered it even more, lol.
I am planning on getting some exhaust tips when I get a cat back put on to start with, and then eventually replace the whole exhaust. I don't care much for the cowl hoods but thanks for the suggestion. As far as lowering it, I scrape the bottom of the front lip enough as it is, and I'm allready paranoid when I go to park about hitting the wheel stops, I can't imagine how much it would scrape and how much more paranoid I would be if I lowered it even more, lol.
thats the reason i wont lower mine lol if its a DD then lowering it is a nono the reason i suggested it is because this guy has one of the sickest thirdgens ive ever seen i am in love with his car lol it just looks so damn good http://s190.photobucket.com/albums/z...edRS/?start=40
thats the reason i wont lower mine lol if its a DD then lowering it is a nono the reason i suggested it is because this guy has one of the sickest thirdgens ive ever seen i am in love with his car lol it just looks so damn good http://s190.photobucket.com/albums/z...edRS/?start=40
Wow, that is sweet and the stance looks great. I can see why you like it so much. If i was to lower my car like that I wouldn't have to be worried about being paranoid anymore, the front end would be hanging off a bumper stop or curb somewhere, lol.
Wow, that is sweet and the stance looks great. I can see why you like it so much. If i was to lower my car like that I wouldn't have to be worried about being paranoid anymore, the front end would be hanging off a bumper stop or curb somewhere, lol.
.....AIRRIDE
BTW...nice car...love the red.
__________________
Member of Camaro Country F-Body Car Club - www.ccfbg.com
Member of Muppet Motorsports
1989 Camaro RS (Z28 clone) •305 TPI swap with LT1 cam & modified air intake •700R-4 w/corvette servos, boost valve, 3-4 full shift kit & 1800 stall •Jet Hot coated Edelbrock TES headers •3" Flowmaster cat back exhaust (w/ dual low restriction cats.) •Accel coil •3.42 Strange gears •Auburn diff. •UMI sub-frame connectors •UMI A-arms •UMI wonder bar •UMI adj panhard rod •UMI lca & UMI lcarb •BMR battery relocation •92 gfx • IROC hood, rims, grid tail lights, steering pump •custom paint... May the GAOTU protect you!
, not feeling it.
im still lookin for some blue door panels tho cuz he cut a hole in em for some 20 watt sparkomatics
