Quote: Originally Posted by 19doug90 got an address? need a bunch of stuff in about a month from now. 10448 170st, make sure you come and talk to me, no one in that store knows 3rd gens except for me.

jokes i work at 176 and 111 right now, ill pop by one day

Anyone have any sugestions on car storage? i'm in the west end but will not need to access it often so i mean anywhere in edmonton isnt really too far.

I'm going to talk to the people at u-haul i think i can get storage for my car for around 50 bucks a month. Doesnt need to be heated just dry, all sugestions are welcome, am definitly on a strict budget.

Wow, if you can get covered storage for $50/month I'd be shocked. I'm pretty sure if you want a bay you're looking at $200 with no heat. If you don't have a bay you have to be afraid of someone scratching or hitting it.
Hope you do find it though, let us know.

bah i really hope thats not the case because thatll mean that i have to leave my camaro in ontario and no camaro for this summer. I'm going to go check tommorow, living in a townhouse sucks!

When are you bringing your camaro out here?
It will be cruising season soon enough. It was 11degrees out today, a few cold days couldn't hurt her too much.

if i can find storage (i have two cars and only 1 parking spot) ill have it shipped out here by train before the end of the month. if not then i wont have it till next summer.

To get it to pass an out of province i just need to wire up the reverse lights to the tranny as well as wire up my Dakota digital sgi5 to get the speedo working.

HELP need a descent shop in the west end.

Somethings wrong in my yukons valvetrain i think it dropped a lifter and i dont have a garage so i cant do the work myself.

Need this truck to get too and from work every day, need help asap if anyone can reccomend a place

JD Car Care is in the west end, and they've always been honest to me. I would talk to them, however I know they are typically booked up.


You can always rent a bay at Desro's and do the work yourself...

cool ill keep them in mind for the future.

Pulled the valve cover on the side of the road where my trucks parked and 3 rockers were mega loose, tightened them running a half turn past where they stopped ticking and all seems well now.

Hey peoples, due to my current situation I am looking to sell my camaro. It doesn't run currently (I'm working on that) and the body isn't in the best shape, but I'm selling cheap. It's an '89 RS, 305 throttle body.

I live in edmonton, so pm me if you're interested and want my phone number.

http://www.facebook.com/group.php?gi...2779225&ref=mf

please join all edmonton thirdgen owners!

hey guys i just picked up a 89 gta that needs some tlc, id like to cruise one day also got a 02 s10x with a 5.3 to cruise to,im out by vegreville

hey, I am in edmonton and have an 87 gta red, and an 89 turbo ta, white. I'll go cruise with you whenever. My cousin has a 91 camaro and he likes to cruise around too. Just let me know.
Jarred.

my third gen should be on a car hauler from ontario by the end of the week, give me two weeks

come on edmonton guys, lets go cruising when hockeys not on!!!!!

Just thought I'd say hi to guys. I grew up in Redwater and lived in Edmonton for 7 yrs at 144thave&50thstreet. I Went to O'leary high school (Grad89') Most of my family lives in Edmonton still and I come down there quite often. Maybe next time I come down, I can hook up with some of you guys and go cruise Whyte ave & Harwelak or drink some beers! Haven't had my Z down there for a few years but thinking of driving it down for the Grand Prix or whatever they call it this year.

hey ya just let me know and I'll cruise whyte ave with you. Did on sat night and it was pretty fun, had a few drinks then did a little more cruising. it was fun

anyone know a good shop in the capilano area? I can't deal with my pos car myself apparently.

6)其他各种疑难堵塞。 疏通、 维修、 安装部,工程打孔. 清洗管道专业技术人员疏通：厕所、蹲坑、马桶、坐便器、地漏、菜池、浴缸、市政管道、阴沟。 清洗管道清洗管道专业技术人员安装：上下水（改）安装，如：上水管有镀锌管、铝塑管、ＰＰ－Ｒ管、铜管、软管；下水管有ＰＶＣ管、铸铁管、钢管等，及暖气装、油烟机、热水器的安装及维修服务。下水安装：承接安装各种PVC管、清洗管道铸铁管、水泥管下水管道及改建一楼独立下水等工程。 清洗管道

please dont spam TGO douchebag

Perhaps the last weekend this year we can get out and cruise. Monday looks like its the best day temp wise, if anyone wants to meet Downtown early in the afternoon for a bit chime in here. Lets see who's who before the snow flies..

ya I'd be down for that, cruise around town one last time in '08. I just don't konw what to drive the GTA or the TTA???
Jarred.

hey, figured i'ld finally join up here, i see i recognize a few names from performance-shop.com. i'm in wainwright, had 3 third gens in the last 8 or 9 years so what better place to be than a third gen site, right?

is anyone still alive on here im from edmonton

Hey man I am around, waiting for the snow to melt..... nuthin doin

Actually just replaced the heater core in my 87 GTA, what a pain!!!!!,
broke the control lever onthe air conditioning while doing it, then had to buy a whole new air box system from David T for just a small $2 part. Ahhhhhh......... what a rip!

So.... I have an air duct system if any one wants.

Jarred.

what do you got, you from edmonton

I have an 87 red GTA I got out of the us, couple bolt on mods, looks stock though. fun car. and you what you got??

i cant believe you bought from david t's....

yea i got 87 iroc-z just got it so its kind of a project right now, you should stay away from davitts hes a rip you would be better to check kijiji.ca

I rep Edmonton. Have an 88 trans am gta and am curious where the cheapest place is to get an exhaust system done.

Hey I don't know the cheapest place but I know a really good place. "Kartunes" they area on 142 st and 115 ave. I know cause I tow my car there so much. Good bunch of guys, and they can bend you an exhaust.

By the way, great looking car

Jarred .

Ya? That's real close to my school. Could they order in an exhaust for you? I'm looking at hooker 2460-1 with ypipe magnaflow cat and flowmaster system kit. Do they have lots of performance parts available?

Kartunes is just a shop, I bet if they order parts for you you could order them yourself cheaper. They don't stock any parts, go to mopac for parts or any performance parts store. But they can put it all together for you and they're pretty good.

Jarred.

how much u asking and details on the car

if u r looking for a good performance shop for parts theres place on 149 st in the west end performance parts plus i think its called

1988 Trans Am GTA. Want to get hooker 2460-1 headers w/ ypipe, magnaflow cat, flowmaster 17233 exhaust kit.

Hey, I'm from Edmonton looking to get into the 3rd gen scene. Anybody selling anything decent or know where to get a good deal? What's the deal with David T's? I don't mind either Z28 or GTA. Would like some T-Tops though.

the deal with david t's is that he is a con artist and a theif, you can do anyone a favour by now buying from him. my buddy has a 1991 Z28 305tpi 5 spd, its a pretty nice car, his username on here is driver101

How so?

Thanks, I'll drop him a message. Sounds like exactly what I want.

just his business practices, and the fact that no part comes off any of his cars in his yard for less than 50$(i got quoted $2100 for a set of deluxe cloth thirdgen black and gray seats)

Thanks for the insight.

Do you go to Shep?

all edm TGO members please read


http://www.thirdgen.org/techboard/ca...en-owners.html (Edmonton 3rd gen owners)

No I go to MAC.
Hey mopac guy, could you get me a quote on that exhaust please?
And could you get me a quote on:
MSD Ignition Wires
MSD Rotor and Cap
Accel Module 35362
Bosch Platinum Plugs
Hooker 2460-1
Hooker 16767
Magnaflow 16829
Any brand of Air Foil.
This would be great.
If you could email me at spyoptic_9@hotmail.com that would be truly helpful.
Thanks!

Just a heads up for any locals looking to get some tuning / engine work done on your cars/trucks. Exercise EXTREME caution or completely avoid dealing with

Martin Gausvik @ AFI Performance in Edmonton.

Martin promised me 800 WHP in my Escalade. I gave him a cheque for $20,000 and my Suburban. He was to order a 3.3L Whipple supercharger, an FLT Stage 5 4L80E, all parts required to stroke the trucks 6.2L to 418 cubic inches. Wheels, Tires, Suspension. etc. All this work was to be completed by September 2008.

What do I have to show for our plans? A beat up suburban, which he returned after driving it for 6 months and a $20,000 lighter bank account. He ordered NONE of the parts and when I asked for my money back he says, "I might take me a little while to come up with that kind of money".

Holy Crap, 20k in the crapper and your truck is now beat up.
CALL YOUR LAWER!!!!

Or even better call your local thug to wak him for a mere 4k.

YA GOTTA DO SOMETHING!!!!

Man I am pissed of for ya,

Jarred.

"A copy of this cheque and the affidavit to be sworn by the person who served the statement of claim on the company. We should be able to note him in default tomorrow or maybe today." My Lawyer's comment this morning.

So any news on this scammer......

any one want to meet on Sunday and go for a rip???