You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Since us Canadians have problems with shipping or dealing with sellers across the border, for the time being I will allow for sale ads to be posted as within this thread.
Remember that thirdgen.org is not responsible for the transactions taking place on the board. They are private transactions.
Let me know when the parts are sold so I can delete the posts then.
Also, please do not respond to ads within this thread. Please PM or email the seller.
I have a 3.73 gear for a 10 bolts rearend with complete bearing kit that goes with it. Both brand new. (I've got a 9 bolts on mine so it's no use for me )
selling both for 300$ CDN + whatever shipping cost. paid over 400$
Ive got a vast selection of 3rd gen parts. Its all I do.. convertible parts available too! Check out my site www.irocnparts.com and email me your requests! I promise to get back to you as soon as possible!! with pics too!!! thanks!! great idea on the classifieds thing
Set of 2 lower ball joints. Brand new. Bought them four years ago, but I decided to buy the whole control arm instead. Made by Federal Mogul. Paid $55, make me an offer, PM or email.
Last edited by camaro_junkie; 12-18-2003 at 08:07 PM.
Hi, hope someone in Canada migh be able to help me find some plastic trim pieces for the inside door armrests for my 89 Trans Am. See this page for photos and descritptions (only 88 and 89 had these in the correct color) http://la.rsson.com/tta1078/looking4/looking4.html
Any help would be really appreciated as I've been missing the driver side since I bought the car over 3 years ago and the passanger side on is cracked and needs to be replaced...
1987 front bumber w/ inserts $25
1983 front bumper $25
1983 Rear Bumper (the kind that doesn't have inserts). $25
1985 and 1987 V6 Auto Transmission. $75 each
Recently rebuilt 2.8L heads $50.
set of 15" rims like the gold GTA snowflake?? except they are not gold. three need work one is in very good condition $50 + shipping for the good one $75 for the set for pick-up.
-used iroc coil springs(one like new frt iroc one, one good rs frt one)(you pay shipping tho) (1 frt rs one and 1 frt iroc one are 25us plus buyer pays shipping)
-stock side markers (3rd gen camaro) 10bucks shipping incl.
-stock t5 shifter(no knob) $40 shipped
-fuse panel cover (3rd gen camaro) $15 shipped
-3rd gen camaro 2 floor dome light covers $10 shipped
-stock single elec fan for 3rd gen $50 shipping incl.
-orig. 84 fiero owners manual average to used condition for yr $25 shipped
- 2nd gen camaro or firebird power trunk (can be installed on non p/t 2nd gen fbodys) $25 shipped
Wanted to buy
-87 camaro orig. owners manual
-rad air deflector (below rad)
-outside window sweeps/rubbers (no cracks at all)
-centercaps for firebird wheels
-ttop headliner blk or gry (2 of them)
-nose emblem for iroc (mint or new shape)
-mint overflow bottle and washer bottle for camaro
- preamp eq (fits under deck)
better too pm me or email me dont wanna fill up this thread....
Jeff
Selling Holley Stealth Ram. Basically Brand new used for maybe 300 miles. Comes with stainless fuel lines for tpi and adjustable regulator. Can come with distributor/wiring harness and ecm if needed. Going with tottaly diff setup.
Also have. Complete tuning package for 90-92 Speed density. Power programmer, akm built cable, p166 laptop, ac/dc convertor, tunercat, datamaster, chip and memcal adapter
Also have roller cam comp cams XE 224/230 w/ 500 lift at 1.5 rockers
car has a t-56 (6spd tranny) - auburn posi unit w/ 3.7.3 gears
3 inch exhaust w/ slp headers and flowmaster muffler
hotchkis suspension (trailing arms, panhard bar trans brace)
GM Motorsport springs
the car looks stock, original paint, I am the original owner
This car is very clean, and in showroom condition. This car has less than 60,000 KM on it and it shows that. The motor has less than 5,000 km
I never drove it in the snow, and never in the rain, nor do I leave it parked for hours outside under the sun. This car has been driven mostly at night, or Sunday Afternoons.
PLEASE SERIOUS INQUIRES ONLY,
I am looking for the best offer, try me ....
I will consider to seperate the motor and sell the car rolling.
make me an offer...........
4 Michelin Arctic Alpins 215/75/15s on used 15" chevy 5-bolt steel rims. Only about 5000 or so km on them, basically new. They fit on my 2.8 '86 SC fine with stock springs (only slight rubbing with wheel cranked), but I don't think they'll fit on my car anymore with the 1.5" drop. I paid about $650 for the whole package. I would be willing to let the tires go on their own for $400 or tires and rims $450. PM or email
Last edited by camaro_junkie; 06-10-2004 at 12:13 PM.
I need a 3 series carrier for my 9 bolt. I bought one off ebay, but the thing was a P.O.S. not a posi, it was completely warn out!! I kissed $200.00 Cdn goodbye.
Anyway, if you have a GOOD posi 3 series carrier then email or pm I am located in B.C.
I just opened the box and set them on the heads and found out they were for standard heads not centrebolt. Summit said I can return them for 10% restock fee.. So if someone wants to give me $260CDN they are yours... if not they go back. part# TFS-31400510 1.5Ratio
Selling my 1985 camaro(need winter car ) it has 190k on it but is running great! I have replaced exhaust from headders back, clutch/flywheel, all brakes, steering pump with high pressure line and more. It is Hugger Orange and the paint is mint.
The rims are not the best looking but that is the only thing wrong(they are gold IROC rims)
IM selling this car cert. and e-tested(no more e-testing) for 3800 obo. Email if interested This_is_a_violation@Hotmail.com
Looking for somewhere to start my project. If anyone has a roller-L98, 400 or 327 short/bare-blocks shoot me a message. Looking to buy hopefully by the end of 2004, so let me know what you go and what you want. Thanks
Car runs and drives fine, but has the passenger door and post smashed in (t boned yesterday morning). Rear discs, 305 (not HO - but have an HO instrument cluster), 4 speed auto, air induction works, new front calipers. Lots of good parts. $500 and take the whole thing, will not part it out (no space).
Wanted, any third gen firebird/Trans am project. Just pm me. I'd sort through any that are posted on this page, but it is late. Thank you.
That is, any located in the interior of BC, Vernon preferably.
(Actually, I was going to email the guy right above this post, but umm, gmail seems to not be working right now, but I'll get back to you... Yeah, I know I'm lazy to post a wanted when what I want is actually the post right before mine... anywho)
Last edited by Projectcarless; 10-04-2004 at 02:24 AM.
)
) it has 190k on it but is running great! I have replaced exhaust from headders back, clutch/flywheel, all brakes, steering pump with high pressure line and more. It is Hugger Orange and the paint is mint. 
