Alright boys, went out and spent a ton of money and got everything pretty good deal but still cost alot... Here is my set-up... 2 6x9 JBL speakers 2 4x6 JBL speakers 2 amps, they're different, one for speakers, one for subs... 2 jbl 1000w 12 inch subs rockford fosgate capacitor all wiring equipment.... my big question is... i want to get a box tomorrow cuz i'm putting this stuff in on monday.... is it best to buy a box or a board? any suggestions or recommendations would be appreciated before i install this sttuffff

buy a box...or build one for cheaper ten buying a premade box. If you build a box then you can create it to have the optimal volumetric space needed for those subs. Being 1000watt subs and 12" I am guessing they are going to want about 1.5 to 1.75 cubic feet of volume a piece. Pre fabbed boxes only sport maybe 1 cubic foot of air. The subs won't sound as good.

Stay away from baffleboards. They give the subs a seriously hollow sound as you will have air leaks due to the enclosure not being completely enclosed.

MDF is fairly cheap, building your own box isn't too hard. Just do it piece by piece. Thats how I built mine.

jbl make nice stuff i ahve always been happy with them. why did u go with components though? jw.

ya i had those jbl 12 1000 watt subs, good subs, the box i used was 1.5 cubic ft. i think thats whats recommended.