Car AudioCar audio related questions and helpful hints for building the best sound system for your car or getting the most out of what you have.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Hey guys i just bought a 1985 Trans am. I of course took the old stereo out and someone before me hacked up the wiring and i had no idea what was what, Well we got everything working except when you preset radio stations and turn off the car they dont stay in the stereo. It worked in my old car but with this it doesn't seem to keep any settings i put in and its getting annoying. Any help would be great thank you guys
well on the car side of the harness there will be an Orange wire that will have a constant 12 volt as long as the fuse isn't blown. That will be your memory wire. Make sure you test with the lights on and off because of the illumination wires
ok well thats what its hooked up to now is an orange wire but other than that there is a gray soild wire and a soild yelloe wire not hooked up i will take pics because its pontless to explain unless you can see what i mean but thatnks for the replies
I agree with Broc...there are 2 power wires. The constant 12v wire and the ignition wire which only has 12v when the car is on....I'm pretty sure those 2 are crossed or atleast the ignition wire is hooked up and not the constant...
Mods so far: MSD Cap and rotor, MSD ignition coil, Accel 8.8mm ignition wires, Hooker Super Comp Shortie Headers, Flowmaster 3in catback, underdrive crank pulley, custom cold air intake, NOS wet 125 shot, air foil and a lead foot! no E/T's yet. ...TURBO COMING SOON...Other mods include keyless entry and remote start, and Sequential Turn Signals.
ok guys to bring back this old thread nothing is working i have no memory and my sub kicks in and out no idead why all cables are good. I looked this morning again because its started to piss me off but i dont even have that many cables coming off of my deck. I have the right front left front right rear left rear. I also have the remote, ground power and this big fat yellow cable that has been spliced either by GM or the previous owner.I tried switching the power cable from the deck to the orange cable and the nut on my battery got extremely hot so i know that not the answer. also with everything hooked up i have from the original wiring harness on the car i have an orange gray and brown wire. Funny huh i love stupid people that dont leave me the harness. anyway any help would be great. If you need pics i can take some and send them to you.
What kind of radio is it? If you tells us what brand radio we can probably tell you exactly what color wires to hook to what though the diagram below should tell you unless it's really hacked up.
For the subs, do you have the amp hooked up properly with its own power cable ran to the battery with a fuse inline? Does it have it's own ground cable of sufficient gauge wire? If the subs (amp) keeps cutting in and out it's probably either a bad ground or a loose/faulty connection at the remote turn on lead, usually blue or blue/white stripe on aftermarket radios.