Car AudioCar audio related questions and helpful hints for building the best sound system for your car or getting the most out of what you have.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a 1990 iroc vert and the rear speakers are in need of replacement. I have a few questions; Do I need to remove the panel to get to the rear of the speaker or is there some trick out there that I'm not seeing? Is it a pain in the butt to remove? Is there a direct replacement out there aftermarket? What size are they? I would like to reuse the orginal covers, and use 6X9, is that possible? Thank you in advance...Mike
__________________ 1990 Iroc Z vert
1969 fathom green camaro
2004 silverado 4x4 Z71
hey there i used 6x9 in my 92 and my 84 but iam sure there all the same !
to get the cover off you have too unscrew the hook at the top of the spaerker cover
it a really long star head screw.
then lift up on the panel it should come right off homie ! good luck !
just do eveything in reverse to put it back together !
__________________ IAM OF MY MOTHER AND FATHER ! I MAY NOT BE RICH IN MONEY BUT IAM RICH IN SOUL AND MEANINFULGNESS "T.R.P"
my 89 formula 350 had one rear speaker blow i replaced both rear with:
Alpine SPR-69C 6"x9" 2-way Car Speakers
they are direct replacements and fit the bracket that are in my sail panels. they sound like typical 6x9 so dont expect a huge improvement. they are better than stock but not astoundingly so.
Last edited by Mudskunk; 09-16-2009 at 11:01 PM.
Reason: addition
