Me of Course

Hello I just installed a radio in my car. It works fine but the only problem is that it does not memorize anything! When I turn off the car then turn it back on I lose all my radio channel sets. What could be the problem? I'm pretty sure I wired everything right even though the wires are really confusing to trace because of the last guy who owned the car made a mess with them.

This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!

Me of Course

I found out what the problem was, it wasn't getting constant power from the battery. I ran a wire from the trunk release to the radio and now it works fine

bradley23150

Was about to say that same thing, as my radio loses memory as well.

__________________
Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more