Camaro Owners who want double din, possible group buy on the DoubleD units
#1
Supreme Member
Thread Starter
Camaro Owners who want double din, possible group buy on the DoubleD units
Hey,
So I was following the other threads about the DoubleD bezels and decided to write them and let them know there were some interest in the Camaro ones here, and if they would be interested in a group buy.
Dennis just wrote me back and said the following:
So I'm in! Anyone else want to commit?
Here is ahttp://shop.doubledmods.com/1982-199...aroDDbezel.htm to see what it looks like:
So we need 10 people willing to sign up and we have to send in our old bezels.
1. mygta87
2. 91z28ss
3. toomany
4. 86gn
5. IWANNAROCAGAIN
6. No4Play
7. carattini
So I was following the other threads about the DoubleD bezels and decided to write them and let them know there were some interest in the Camaro ones here, and if they would be interested in a group buy.
Dennis just wrote me back and said the following:
HI Chris
I am sorry I am WAY behind on emails and messages as I am in Alabama currently this week at our second location.
We can do a group buy if you like. 10 people 65.00 each plus shipping to send us your bezel to modify. I would do them all in same week and we could pick a week to do them in so we could minimize the down time. I would need them all shipped in so we had them at once.
Let me know what you think on this.
I am sorry I am WAY behind on emails and messages as I am in Alabama currently this week at our second location.
We can do a group buy if you like. 10 people 65.00 each plus shipping to send us your bezel to modify. I would do them all in same week and we could pick a week to do them in so we could minimize the down time. I would need them all shipped in so we had them at once.
Let me know what you think on this.
Here is ahttp://shop.doubledmods.com/1982-199...aroDDbezel.htm to see what it looks like:
So we need 10 people willing to sign up and we have to send in our old bezels.
1. mygta87
2. 91z28ss
3. toomany
4. 86gn
5. IWANNAROCAGAIN
6. No4Play
7. carattini
Last edited by cdoyle; 01-03-2014 at 06:34 PM.
#2
Member
iTrader: (4)
Join Date: Oct 2009
Location: California
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 CHEVY IROC-Z28
Engine: 355 Built/High Performance
Transmission: 700R4 Swap For T56
Axle/Gears: 3.73 Posi
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Count me in
#4
Junior Member
Join Date: Jul 2012
Location: Oklahoma
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Car: 64'olds 442, 87 Formula 350
Engine: 350 tpi
Transmission: Auto
Axle/Gears: 3.27 borg warner 9 bolt
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Only Camaro? If I could do a birds I'd be in
#7
Junior Member
iTrader: (1)
Join Date: Aug 2013
Location: WA State
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
I'm 100% in for one. Just earlier today, Car Toys in Lynnwood WA quoted me $300 extra labor to modify an oem bezel to fit one of their double din touch screens... in ADDITION to the regular $220 install. That's a total of $520 + tax for the LABOR ALONE. Yikes.
Yeah, right
Jeff ~
Yeah, right
Jeff ~
Last edited by z28v8; 09-13-2013 at 10:44 PM.
Trending Topics
#8
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
I'm 100% in for one. Just earlier today, Car Toys in Lynnwood WA quoted me $300 extra labor to modify an oem bezel to fit one of their double din touch screens... in ADDITION to the regular $220 install. That's a total of $520 + tax for the LABOR ALONE. Yikes.
Yeah, right
Jeff ~
Yeah, right
Jeff ~
#9
Supreme Member
Join Date: Dec 2000
Location: stallings,n.c.
Posts: 1,271
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 camaro rs convertable
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: 7.5"3.42 gears forth gen 2000 camar
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
im waiting to see one installed and see how difficult it is to make a dd fit.
#10
Junior Member
iTrader: (1)
Join Date: Aug 2013
Location: WA State
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Do we have to send an oem bezel in as a core?
Any pics/ comments/ reviews from members who have already bought one of these?
Any pics/ comments/ reviews from members who have already bought one of these?
#11
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
yes you are going to send in your original piece and then he's going to work on em all at the same time and send them back to us. the only pictures I've seen of the Camaro unit are the ones in the other thread on this forum this the person said it looked good I haven't seen the pictures of them installed yet
Last edited by cdoyle; 09-16-2013 at 02:42 PM.
#12
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Come on guys, I've seen so many threads on this forum about if it's possible to put a double din. This makes it very easy and will look stock.
We need 6 more people to sign up to get it at this price.
We need 6 more people to sign up to get it at this price.
#14
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
#16
Member
iTrader: (10)
Join Date: May 2013
Location: Aliquippa, PA
Posts: 378
Likes: 0
Received 5 Likes
on
1 Post
Car: '87 Trans Am
Engine: 5.0L-V8
Transmission: 700R4
Axle/Gears: 3.23 - Posi -10 Bolt
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Correct me if I am wrong, but $65.00 is the standard price to modify a bezel you send in.. (at least with birds)
http://shop.doubledmods.com/1982-199...fb-tayours.htm
http://shop.doubledmods.com/1982-199...fb-tayours.htm
#17
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Correct me if I am wrong, but $65.00 is the standard price to modify a bezel you send in.. (at least with birds)
http://shop.doubledmods.com/1982-199...fb-tayours.htm
http://shop.doubledmods.com/1982-199...fb-tayours.htm
Link to Camaro page.
http://shop.doubledmods.com/1982-199...aroDDbezel.htm
#18
Senior Member
Join Date: Jun 2010
Location: Austin, TX
Posts: 731
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 G92 IROC-Z
Engine: 5 Liter 305
Transmission: T5
Axle/Gears: 3.45
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Im totally in but first, how is this going to look? Is the factory appearance going to be kept? In other words, will it look stock but not? I know how to make a double din face plate using the stocker with fiberglass and some resin and spray paint, but it wont match the other trim pieces.
Before I go in to this I need to know if they have a texture method that resembles stock pieces.
Before I go in to this I need to know if they have a texture method that resembles stock pieces.
#19
Junior Member
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Count me in also!
#20
Junior Member
Join Date: May 2012
Location: Wisconsin
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Dodge Durango R/T & 99 Vette
Engine: Hemi and LS1
Transmission: auto on both
#21
Junior Member
Join Date: May 2012
Location: Wisconsin
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Dodge Durango R/T & 99 Vette
Engine: Hemi and LS1
Transmission: auto on both
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Correct me if I am wrong, but $65.00 is the standard price to modify a bezel you send in.. (at least with birds)
http://shop.doubledmods.com/1982-199...fb-tayours.htm
http://shop.doubledmods.com/1982-199...fb-tayours.htm
that's correct for price
but if you all want them done at once and to schedule them in and send them at same time then we need to do 10 of them at a time.
We have over 260 current orders for bezels and WAY behind on orders and we are not even into our busy season yet as winter months we get just crazy busy
#22
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
We only need 3 more, I would love to get these sent to them within the next few weeks.
Anyone else want one?
Anyone else want one?
#24
Member
Join Date: Aug 2006
Location: Tampa, FL
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc-Z Red T-tops
Engine: 305 TPI LB9 55k miles
Transmission: Auto 700r4
Axle/Gears: 2.73 posi
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Guys. I have a 3d printer and make parts for my side business and hopefully new patent (audio system) not car related.
Well I am going to print a new bezel for a double din. I will keep it simple but see if I can add options for outboard button/switches etc
needless to say within the next 1-2 months I wil have prototypes and gladly support and print for the group here at minimal cost
Well I am going to print a new bezel for a double din. I will keep it simple but see if I can add options for outboard button/switches etc
needless to say within the next 1-2 months I wil have prototypes and gladly support and print for the group here at minimal cost
#25
Supreme Member
Join Date: Dec 2000
Location: stallings,n.c.
Posts: 1,271
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 camaro rs convertable
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: 7.5"3.42 gears forth gen 2000 camar
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Im totally in but first, how is this going to look? Is the factory appearance going to be kept? In other words, will it look stock but not? I know how to make a double din face plate using the stocker with fiberglass and some resin and spray paint, but it wont match the other trim pieces.
Before I go in to this I need to know if they have a texture method that resembles stock pieces.
Before I go in to this I need to know if they have a texture method that resembles stock pieces.
#26
Supreme Member
iTrader: (6)
Join Date: Oct 2006
Location: West of Toronto
Posts: 3,041
Likes: 0
Received 6 Likes
on
6 Posts
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
GLWS
I posted this link up on our club board. Few members might join in.
I posted this link up on our club board. Few members might join in.
#28
Member
iTrader: (3)
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Guys. I have a 3d printer and make parts for my side business and hopefully new patent (audio system) not car related.
Well I am going to print a new bezel for a double din. I will keep it simple but see if I can add options for outboard button/switches etc
needless to say within the next 1-2 months I wil have prototypes and gladly support and print for the group here at minimal cost
Well I am going to print a new bezel for a double din. I will keep it simple but see if I can add options for outboard button/switches etc
needless to say within the next 1-2 months I wil have prototypes and gladly support and print for the group here at minimal cost
#29
Supreme Member
Thread Starter
#30
Junior Member
Join Date: Sep 2013
Location: Random Hostile Territories
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS Heritage Edition
Engine: LS6 Mut
Transmission: 4L60E
Axle/Gears: Stock
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
I'm in
#33
Junior Member
Join Date: May 2012
Location: Wisconsin
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Dodge Durango R/T & 99 Vette
Engine: Hemi and LS1
Transmission: auto on both
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
just so you guys know
we are already booked solid for the next 6 weeks as of today for all double din bezel orders.
We are heading into our busy season and its going to get ugly on times from now to April.
We will do the best we can on this group buy for everyone
we are already booked solid for the next 6 weeks as of today for all double din bezel orders.
We are heading into our busy season and its going to get ugly on times from now to April.
We will do the best we can on this group buy for everyone
#34
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Come on guys, we just need 2 more.
I would really like to get these sent off to them before they get too backlogged.
I would really like to get these sent off to them before they get too backlogged.
#36
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
There has got to be 2 other people on this forum who wants a true double din upgrade and not have to try fabricate something themselves.
#38
Senior Member
Join Date: Jun 2010
Location: Austin, TX
Posts: 731
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 G92 IROC-Z
Engine: 5 Liter 305
Transmission: T5
Axle/Gears: 3.45
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
I dunno man. Maybe this is just a bad angle with some color difference from the camera flash but it doesn't really match in this picture. The other thing that throws it off is the use of phillips head screws where the original allen head screws go. I swear the screw holes are also recessed a little that have a pocket the head of the screw sits in on the factory piece. I can't tell if they do on this piece or not. Also the grain seems to be shallow compared to the surrounding dash. Im not even going to comment on the fitment of the radio, but it's not helping.
Sorry guys Im not trying to be a stickler, it just comes naturally.
Sorry guys Im not trying to be a stickler, it just comes naturally.
#39
Supreme Member
Join Date: Dec 2000
Location: stallings,n.c.
Posts: 1,271
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 camaro rs convertable
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: 7.5"3.42 gears forth gen 2000 camar
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
to me it looks like they covered it with vinyl.
#40
Banned
iTrader: (2)
Join Date: Mar 2008
Location: Colorado
Posts: 135
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Sport Coupe
Engine: 2.8 - Bored/Stroked, Pacesetters
Transmission: 5 spd Manual
Axle/Gears: Stock
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
From all of the other recent posts around here this is going to take 3+ MONTHS to get done. (I'm betting on a lot longer also) I'm not sold on the color or texture either. I'm a stickler just like TxTtopZ so these couple of things are keeping me out of the group buy. Sorry guys but good luck!
#42
Junior Member
iTrader: (1)
Join Date: Aug 2013
Location: WA State
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
sorry guys, but due to lack of interest I'm going to jump ship on this. In fact, I believe that I've already found a better option... I'll update in a new thread when the project is complete...
Jeff ~
Jeff ~
Last edited by z28v8; 10-07-2013 at 10:49 AM.
#43
Member
iTrader: (16)
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
I'm not trying to discourage anyone in the group buy or thinking about joining, I just want to give you the facts/heads up. I purchased mine July 19, the money was taken out immediately and I have been told that I will get an e-mail when they ship it. I am still waiting for that e-mail. So we are currently at 11 1/2 weeks and counting.
There is a couple of different pics by ringo234 on the bottom of the second page of this thread https://www.thirdgen.org/forums/afte...-double-2.html and though they are not super clear they do show the bezel with the torx screws.....
Like I said, not trying to discourage anyone, just want to give you a heads up. Maybe a group purchase will be able to go through faster... I dunno.
There is a couple of different pics by ringo234 on the bottom of the second page of this thread https://www.thirdgen.org/forums/afte...-double-2.html and though they are not super clear they do show the bezel with the torx screws.....
Like I said, not trying to discourage anyone, just want to give you a heads up. Maybe a group purchase will be able to go through faster... I dunno.
#44
Member
iTrader: (16)
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
By the way, the quote from the other post that goes with the pictures above by Termn8r - "As promised. Here are my pics. I agree, the texture isn't perfect, but it's really close. I actually think the screws bother me more than the texture (will have to fix that). They use an original trim and plastic weld it to fit properly because it has to be raised and lowered then they spray paint it which is why you lose some of the texture, but I am very happy with it."
Hope that explains the vinyl looking texture.
Hope that explains the vinyl looking texture.
#46
Supreme Member
Thread Starter
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
#47
Member
Join Date: Jan 2009
Location: North Carolina
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Car: Pontiac 89 GTA
Engine: 350 TPI 5.7L V8
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Guys. I have a 3d printer and make parts for my side business and hopefully new patent (audio system) not car related.
Well I am going to print a new bezel for a double din. I will keep it simple but see if I can add options for outboard button/switches etc
needless to say within the next 1-2 months I wil have prototypes and gladly support and print for the group here at minimal cost
Well I am going to print a new bezel for a double din. I will keep it simple but see if I can add options for outboard button/switches etc
needless to say within the next 1-2 months I wil have prototypes and gladly support and print for the group here at minimal cost
Let me know when you are ready to do this...
#48
Member
Join Date: Jan 2009
Location: North Carolina
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Car: Pontiac 89 GTA
Engine: 350 TPI 5.7L V8
#49
Member
Join Date: Jan 2009
Location: North Carolina
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Car: Pontiac 89 GTA
Engine: 350 TPI 5.7L V8
Re: Camaro Owners who want double din, possible group buy on the DoubleD units
Well if I'm Still on time I can jump in on this.
#50
Supreme Member
Thread Starter