i need vacuum hose help.. Rochester....
#1
Member
Thread Starter
Join Date: Sep 2001
Location: Buffalo, N.Y
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Z28 Clone
Engine: 350
Transmission: TH350
i need vacuum hose help.. Rochester....
ok... i've got a 78 qjet.. the thing has more plugs in it that anything....(rubber hoses with screws in the end)
ok.. i have my vac advanced hooked up to the vacuum port on the pass side front....... and the PCV.. in the front.. thats it ...
i have a plug on the front of the carb driverside on the baseplate.... what should go there?
at the top of the carb on the back between the a/v flaps theres another one ..blocked off... and just below that on the back baseplate theres another blocked off......................
what are these connections for....??
i get about 9 miles a gallon..
Rob
ok.. i have my vac advanced hooked up to the vacuum port on the pass side front....... and the PCV.. in the front.. thats it ...
i have a plug on the front of the carb driverside on the baseplate.... what should go there?
at the top of the carb on the back between the a/v flaps theres another one ..blocked off... and just below that on the back baseplate theres another blocked off......................
what are these connections for....??
i get about 9 miles a gallon..
Rob
#4
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
The one on the back topside by the air valve went to the hot air choke (source for filtered air).
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
05-17-2020 10:44 AM
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM