CarburetorsCarb discussion and questions. Upgrading your Third Gen's carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i have an edelbrock 1406 carb, question on step-up rods
i pulled the top off of my carb today and the step-up rods are both bent a little towards the bottom. it looks like they are both bent the same amount. but i was wondering if they are made to be like that, or did mine get bent?
__________________ 91 camaro: 350 4 bolt,luinati cam 218 dur. 458 lift both sides 110lsa, trick flow 195cc heads 62 cc chambers 2.02, 1.6 valves, Edelbrock Performer RPM Intake 600cfm holley 1850 vac secondary hedman longtubes, built 700r4 , 3.73 posi, k&n 14x3 filter, weld draglite wheels (15x3.5 with mickey thompson's and 15x8 with cheap tires) 1/8TH MILE BEST TIME-9.069 AT 76MPH BEST MPH-9.2XX AT 78MPH
91 camaro: 350 4 bolt,luinati cam 218 dur. 458 lift both sides 110lsa, trick flow 195cc heads 62 cc chambers 2.02, 1.6 valves, Edelbrock Performer RPM Intake 600cfm holley 1850 vac secondary hedman longtubes, built 700r4 , 3.73 posi, k&n 14x3 filter, weld draglite wheels (15x3.5 with mickey thompson's and 15x8 with cheap tires)
