| Mech Secondaries not opening
So I finally decided to check if my secondaries were opening all the way and they're no where near what they should be. If I hold it to the floor they maybe open 15 degrees. I have a BTO TV cable and throttle cable bracket. I had to modify it originally by adding a piece of steel to extend cable out so it wouldn't bind. I'm using the stock 91 TBI cable that I had on my car. The carburetor is a 700DP. I can open the secondaries by manually opening the throttle but it takes A LOT of travel. The carb is second hand so I have no idea what the guy before me did to it. Anyone out there run across this problem or something similar.
Thanks | | |
__________________
1991 Camaro RS, 355 cid, Brodix IK180 64cc heads, Edel Perf RPM Air Gap, Scat 9000 crank, Speed Pro Flat Top hyperuetetic pistons, Fel Pro 1094's, Comp XE268, Jegs 1.6 roller tip rockers, Comp Magnum pushrods, fabricated aluminum valve covers, Hedman long tubes, X pipe, 2.5" Flowmaster 40's, BTO Level 2 700R4, 4th Gen 10 bolt, Richmond 3.73's w/ posi. | 
