CarburetorsCarb discussion and questions. Upgrading a Third Gen carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have recently converted to carb. I put in a regulator and had poor results. The psi from the reg was 1 psi. I opened it all the way and only got 2 psi. i took the reg off and hooked it directly to the tpi pump and made a huge difference. The pump is putting out 4.5-5 psi. Now i am having problems with the secondaries. When the open the engine just gets loud but lose power. I can let off a little bit and it will power back up and accelerate. I can not put the pedal to the floor until i reach a high enough rpm then it accelerates great. I dont know that much about carbs and this tread probrably sounds like many others. please help me!!!
Thanks, Chris
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
