CarburetorsCarb discussion and questions. Upgrading your Third Gen's carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Anyone created any kid of CIA's (Cold Air Intake), Airboxes, or Plenums for their Carb setup?
I was looking at functional hood scoops, shakers, and the like from the older cars at a car show recently (GTO's, 2nd gen T/A's, etc.) - and I was thinking about how crappy my 14x3 open element aircleaner fits on the carb (touches distributor wires, really deep dropbase to clear linkage, and a stupid plastic riser, etc.).
I happened to catch a glimpse of a 1st gen Camaro with a custom built airbox that had two 3-inch CIA tubes splitting in the front, with cone filters of the ends of each, that ended where our washer fluid and rad overflow tanks would be on the 3rd gens.
i had aslp cold air intake that was on my car when it had efi, i just bought some piping from intakehoses.com and a carb hat off of ebay and hooked it all together, if i can figure out how to upload a picture i will
__________________ 89 305,holley 650dp, hooker 2210 long tubes, true duals with x pipe and moroso mufflers, msd pro billet dizzy, msd 6al, comp xr276hr cam ,pro comp aluminum heads,t-56 with ac delco clutch ,spohn x-member and torque arm, 1.65 lunati rockers,weiand 142 blower
11.583 at 119 1.575 60ft www.fquick.com/89305formula
89 305,holley 650dp, hooker 2210 long tubes, true duals with x pipe and moroso mufflers, msd pro billet dizzy, msd 6al, comp xr276hr cam ,pro comp aluminum heads,t-56 with ac delco clutch ,spohn x-member and torque arm, 1.65 lunati rockers,weiand 142 blower
