CarburetorsCarb discussion and questions. Upgrading a Third Gen carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Ok, so for a while now ive been trying to figure out why my car idles rough and stalls out on me every now and then, so tonight i took the air cleaner off that came factory with the car and found 1 little tube/hose that was attached to it, took a pair of vice grips, clamped it off and car seems to idle fine, at least it only fluctuates between 950 - 1000 RPM now as opposed to 500 - 1000 RPM. I traced this hose back and it inserts into the back of the carb...what is this hose for and what does it do? also pinching off this hose what does that do?
Thanks, Trent
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
