Cooling Discuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.

opinion on AC

Thread Tools
 
Search this Thread
 
Old 10-15-2005, 03:31 PM
  #1  
Junior Member
Thread Starter
 
tph87's Avatar
 
Join Date: Oct 2004
Location: iowa
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Car: '87 iroc z-28 5.7 tpi
Engine: 5.7 tpi
Transmission: auto
opinion on AC

hey i am looking for some opinions on what i should do on my '87 IROC-Z-28. when i bought it the guy told me that the AC compressor clutch was bad. in the sale he included a whole compressor beacause he said he never got aroung to swaping the clutches. well i found out that you need to have a special puller to get the clutch off, so i my first option is just swaping the whole compressor w/the clutch.
(but what if the spare compressor is bad?)
second i could just buy a puller and switch the clutch
(but it also needs charged up)
that also got me thinking, IF there isn't enough freon (pressure) in the system the clutch will kick off and on constantly. but i can't afford to go out and charge the system just to find out it
Last i thought about swaping the compressor and converting to 134.
what are some suggestions? thanks
Attached Thumbnails opinion on AC-camaro-after2.jpg  
Old 10-19-2005, 10:54 AM
  #2  
Junior Member
Thread Starter
 
tph87's Avatar
 
Join Date: Oct 2004
Location: iowa
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Car: '87 iroc z-28 5.7 tpi
Engine: 5.7 tpi
Transmission: auto
nobody has any suggestions???
Old 10-19-2005, 11:38 AM
  #3  
Junior Member
 
Hoop88Z's Avatar
 
Join Date: May 2005
Location: Pt. Pleasant, NJ
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 IROC -Z28
Engine: 5.7L TPI
Transmission: 700r4
Axle/Gears: 2.77
Well, you don't know if the spare compressor is worth it, but lets say the thing works. If this car is going to be a daily driver and you like A/C I say you convert it to 134 unless someone.....ahem.....misplaces a few of the older cans.
Old 10-19-2005, 02:37 PM
  #4  
Junior Member
Thread Starter
 
tph87's Avatar
 
Join Date: Oct 2004
Location: iowa
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Car: '87 iroc z-28 5.7 tpi
Engine: 5.7 tpi
Transmission: auto
ok, what does it cost to convert to 134? and where is the best place to get a kit?
and what exactly are you refering about: misplacing a few of the older cans?
Old 10-20-2005, 01:28 PM
  #5  
Junior Member

 
crazymex83's Avatar
 
Join Date: Oct 2005
Location: In Central Illinois
Posts: 56
Likes: 0
Received 4 Likes on 4 Posts
Car: '88 Firebird Formula 350
Engine: L98 TPI 350
Transmission: 700R-4
by misplacing cans he means that you shouldn't be able to buy the old R-12 stuff very cheaply and if someone has a stash sitting around you could score some freon from you would be better off converting to R-134.

If you are going to convert to R-134 the suggested parts to replace are the o-rings, the condenser, the dessicant dryer, orifice tube, and the compressor. Plus, you would need to flush the old lines out to be sure to get any old lubricant and posible metal shavings from your old compressor out of the lines. Lastly, you need to get the recommended lubricant and a few cans of R-134 freon. Think they are up to $10 a can at the auto part stores.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
05-17-2020 10:44 AM
LiquidBlue
Wheels and Tires
32
12-10-2019 04:06 PM
cheesehomer
Power Adders
91
12-31-2015 08:48 AM
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
10-05-2015 06:23 PM
Jlanz55
TPI
2
09-29-2015 08:55 AM



Quick Reply: opinion on AC



All times are GMT -5. The time now is 04:13 AM.