CoolingDiscuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Does any one have the schematics/wiring diagrams and instructions from Willie for his Total Fan Control for the dual fan application? I want to do "Auto 1" and "Fan 1" for sure. I might want to do "Auto 2" and "Fan 2" depending on how well A1 and F1 work. The car is 91 Z28 5.7L/ LB98.
And yes I did try emailing him a few days ago with some questions but got no response yet so I thought I might try you guys.
Thanks Jason,
From reading it that looks like it is. I had never seen it. I thought it came with diagrams/pictures but it looks like they are not needed with these instructions. I'm really bad with electrical but even to me this looks alot simpler than I thought. I should be able to do this no problem. Did you do these mods?
Yeah, I only have the single fan so I only did the single fan portion without installing the switch, I just let the relay turn my fan on and off at 185 using the Hayden kit.
