CoolingDiscuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
just found out why my fan wont come on the switch is unplugged. tho ive had the car jacked up for an hour and cant find where the hell the wire is supposed to come from ne help plz?!?
86 iroc 305 tpi lb9
__________________
Cardomain Sequential taillights
UMI Strut Tower Brace
1st car- Earnednot given
Interior/exterior led conversions
Spohn tubular rear lower control arms - panhard bar - sub-frame connectors
Why are you under your car? Isn't the sender plugged into the water jacket from the top? probably on the intake manifold near the water neck. could also be in the side of the cyl head. I dunno what colour the wire would be, but it goes to the relays.
Switch is on the passenger cylinder head.I think the wire is black, but the giveaway is the connector.Its round/grey & about 3/4 dia.On my car it comes out of the wire loom from above the valve cover & the loom is routed from the firewall.
ok thanx for the help guys. turns out my car originally had the dual fan setup then someone b4 me took that out and replaced it with a single fan harness...so there really was no wire goin to the fan switch. i replaced the coolant temp sensor underneath the throttle body and its good now.
