CoolingDiscuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Like the title says, I recently replaced the blower motor in my 91 Camaro. I bought the motor from O'Reilly, and I swapped the round fan from the old one. I used black RTV to "seal" the motor to the A/C box. The motor works fine, but there is not a large volume of air coming from the vents. Is this normal? could the resistor be bad therefore not allowing the blower motor to turn at max speed? The A/C blows ice cold, but with a low volume of air, it can't keep the interior cool enough on those 100 degree days. Any knowledgeable input would be greatly appreciated.
Tyler
__________________ '91 Camaro RS, 305, Automatic, needs a ton of TLC.
Like the title says, I recently replaced the blower motor in my 91 Camaro. I bought the motor from O'Reilly, and I swapped the round fan from the old one. I used black RTV to "seal" the motor to the A/C box. The motor works fine, but there is not a large volume of air coming from the vents. Is this normal? could the resistor be bad therefore not allowing the blower motor to turn at max speed? The A/C blows ice cold, but with a low volume of air, it can't keep the interior cool enough on those 100 degree days. Any knowledgeable input would be greatly appreciated.
Tyler
Could possibly be the switch on the control panel is bad as well. Might want to try a junk yard to see if they have one. or I THINK i have an extra one if ur interested. 30.00 not including shupping. But let me see if i still have one before i promise you something that i dont still have.
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
