CoolingDiscuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
what CFM eletric fan should i get for a 305 TBI, mildly modded, w/ an all aluminum rad
should a 16" 2500 CFM do
my current fan took a dump and plus i figured out it was not what it was suspose to be
anyway i need to order one like yesterday so fast help would be nice
__________________ "I'd Like To Help You Out, What Way Did You Come In"
"Emissions Control Is Being Able To Hold A Fart In"
"Somewhere, a village in Kenya is missing its idiot."
Check Out vBGarage For All My Cars And Mods Gulf Coast Third Gens Find Us On Facebook orJoin Us Here<Clicky
if it does actually pull 2500 cfm(ratings of many after-
market fans tend to be exagerated),it should do
the job,i recon the stock single pulls about 2500 cfm.
i have it hooked up to a Flex-a-lite variable speed controller. i highly recommend it- very good quality. it works great and pulls a lot of air. this fan, an in-tact air dam, and a 180* stat and not even close to overheating- even on a scorching hot summer day
LG4 305ci 4bbl motor, 2.5" Cherry Bomb Extreme muffler- side exit exhaust, Cragar 15x7 Black D Window wheels (4" backspacing), Cooper Cobra Radial GT tires (P235/60R15), 36mm hollow front sway bar with wonder bar, 24mm rear sway bar, Energy Suspension endlinks and Guldstrand bushings, Edelbrock Elite 4222 air cleaner with K&N filter, FF Dynamics 16" Cyclone electric fan, Flex-a-lite Variable Speed Fan Controller, custom fixed headlight conversion with 5000K HIDs and Silverstar Ultra H7 bulbs, Pilot PL-362W driving lights with Hella 100W H3 bulbs, Deka Intimidator 9A78DT AGM battery
Not quite certain if the 16 7/8ths fits, but turn it around 90 degrees and it´s only 15 7/8ths high which certainly fits in a stock TBI
Anything actually pulling 2500 CFM will do. I replaced my original fan with a 2000 CFM model and it does pull more air then the stock one. I have heard several people on this forum state the original fan pulls something between 1200 and 1500 CFM.
Since my fan gave up shortly after I purchased the car I have no means of confirming this.
Last edited by the solitaire; 06-17-2010 at 03:22 AM.
),it should do
