CoolingDiscuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
So I figured I'd need an internal spring for the lower radiator hose but when I bought the goodyear blue hose kit I figured, hey it's goodyear it has to be decent. Well the lower doesn't have a spring and when it was idling I blipped the throttle and didn't that damn thing almost completely flatten. I'm using a Miloden water pump if that makes the situation any worse. Where is a good place to get a spring / coil so I can put it in the lower radiator hose?
Id did not stay collapsed, i.e. when I let the throttle bracket go, the hose went back to normal. The blip of the throttle put it I'd guess 3000+ rpms.
__________________ 85 Iroc Z28 T-tops, Bilstein struts/shocks, Eibach prokit, sphon towers, Friction Master ceramics, Pretty much every thing steering and suspention wise is new up front.
Electric cooling pump, 3 electric fans, stock 195 stat, 16lb cap.
Newest mod, 145mph speedometer, AEM air/fuel ratio meter, carb tuning.
http://www.thirdgen.org/techboard/en...-v6-parts.html
V6 heads, cam, intake manifold, fuel system, ignition, V6 parts blow out, prices 1/2 to 2/3 the retail price on NIB parts and well below ebay prices on my used parts.