tuner pro seems to be a useless program - Third Generation F-Body Message Boards

1992rs/ss · 03-15-2005, 05:58 PM

ok, so I wired up my aldl port to work with my new tpi setup. I go to connect with the ecm with the key turned forward to on and it won't connect. I supposedly have the right file to read the 730 ecm and before I switched I had to set it to com 4 with winaldl and I would get readings. now with tunerpro I get nothing!!!! I am really starting to hate this program. the only thing I have not tried is trying to connect with the engine running. my dist. is not in right so it doesn't want to run at this moment. all I want to do is make sure that when I get it running I can read my sensor data. I am thinking of finding a diff program cause this just doesn't seem to work. if you have any ideas please help me out here.

884+3 · 03-16-2005, 12:50 PM

Are you sure you have tuner pro set for the correct port # in the preferences settings. Also make sure you have the ADS file setup in the aldl setup page.Maybe test your cable on a friends running car to make sure your cable actually works. Im using tuner pro to datalog with an autoprom so i know it not a completely worthless program.