I used winaldl.Just got my usb aldl cable.Ive been having a rich condition but not sure why.This chip was done by tpichips.I plan on getting some tuneing equipment next but in the mean time....When I dattalogged it said DRP occured.Gave me a closed loop flag and a blm enable flag.I had an intermitten or blinking rich flag and an eecc slow O2 rich/lean flag.On the error codes screen it checked the coolant temp low box all the way up to 180*, but I`m showing no ses light.Ijust did this for about 10 minutes at Idle.Cant drive fer now due to I just lost third gear in my trans.But I will datalog some around the neighborhood.Could it be a faulty coolant temp sensor.IAC said 84 to 86.maf was7.6 to 7.9.TPS said 32,2.1,at 63 volts.Gimmie a hand guys.Thanks

Try downloading TTS Datamaster and get it scanned with that one.
ITs much better because WinALDL only uses 160 BAUD (good for TBI cars)
Our cars have 8192 BAUD (you could get faster info from it)

And itds much easier to see everything in tts datamaster
Pic from when I logged my car..


As you may see there is much more info to read out.
Its free to use 20 times..

If you want you could upload your logfiles from WinALDL here and i´ll check em up

Gotta figure out how to save and upload it and I will.

In WinALDL you have a button thats named : Datalogger click on it and mark all 4 boxes and click start, then it will save all your data into txt files in the program map, (example : c:\program\winaldl\filenames.. like blm, o2 and ongoing)

You have choosen 1227165 ECM under config right ?

Yes I chose the 165 ecm,and I did save the O2 and other files that gave me the option to.I`ll see if I can find them.

I got the tts dattamaster and recorded some but it seems to be telling me about the same stuff.I`m haveing a little trouble finding the propper files to upload.Especialy from tts runs.It keeps saying invalid file

TTS datamaster have .uni files

Datamaster reads the info from the ECM much faster (8192baud) and winaldl only 160baud, so its better using datamaster..

Youve saved the datamaster log it should be in the "C:\program\TTS\DataMaster OBD1\DM-32\Testdata" and the name you put on it.

Cant get it to upload.oh well

try changing extension to .txt to upload

yeah .txt or .jpg should work to upload. .uni isnt allowed to upload.