acian21

so i have a 92 camaro rs v6 3.1 25th anniversary..... I have replaced ignition starter switch , starter and silonoid and my ignition control module... My car will still not turn over... my tachometer is stuck all the way on the right side and will not move and i am almost fed up with it can some one help me out...

This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!

RBob

At key-on, engine-off, does the "security" light on the dash light up and stay lit? Or does it turn off after 4 seconds or so?

If it just stays on then there is a VATs issue.

RBob.

__________________

www.DynamicEFI.com

'92 Camaro in Dark Green Gray Metallic

acian21

sometimes it comes on and stays on then other times it wil go off

RBob

With the security light staying on the starter motor shouldn't crank over the engine. The VATs system disables the starter.

With hte security light going off, the starter should be able to crank over the engine. If it doesn't then there is also another issue. If a stick shift there is a switch on the clutch pedal that interrupts the starter.

If an auto there is a switch on the shifter that will interrrupt the starter.

You can also use a DVM on this switch (auto or stick) to see if power is being applied via the ignition switch.

RBob.

acian21

power is goin everywere so i thinks its the v.a.t.s

acian21

is there anyway just to take the whole vats system out and the car will still work

acian21

so everything has checked out no security light and everything but still wont crank i keep getting a code 46