DFI and ECMDiscuss all aspects of DFI (Digital Fuel Injection), ECMs (Electronic Control Module), scanners, and diagnostic equipment. Fine tune your Third Gen computer system for top performance.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
engine: 383 HSR, 34lbs@51psi, 165cc heads, cam duration at 050 inch Lift 224 int./230 exh., running on MegaSquirt 2
i have managed to make my car running but rest is totaly crap. can anybody help me to make base ignition map (12x12), rev is at 6000 rpm.
I should have something that will help. I can get you close to the stock 8D map from a 5.7 TPI. I'll try to get a look at it tonight and see if I can export the table.
Steve
__________________
1987 Iroc, 5.7 TPI with Megasquirt II 3.0, Precision Turbo PT6766, 14 psi, forged SRP Pistons, ZZ3 bottom end, L98 Aluminum heads, Comp Cams 224/224, Cold AC! 7.71 at 92.5 mph on radials!
Sorry for the delay.. I've been trying to fight off the swine flu for the past couple of days... Anyway the rpm range is default 700-6000 and goes up to 100 kpa, so not good for boost. Hope it helps!