DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Since im awaiting my replacement laptops i have been utilizing my bro's snap on scanner and have a few questions if anyone knows.
The spark advance , from what i can tell its giving me the ecm additional advance, not including the initial advance of the engine. as far as i can tell i believe this to be true going by the load/rpm to what i have programmed, just without any other type of scan tool to back it up.
Also, is their anyway to change what is displayed on the screen?
possible to get your int/blm/map all into one viewabel frame?
i have all the manuals and have used it quite extensively but have never needed to juggle anything around (i know u can change what the led's are for) but i can find nothign if its even possible to change what the main display is..
I use the Snap-on ScanGrafix, which is software where you attach your laptop to the scanner and you can record and display all data in Graph or text form and arrange it any way you would like to.
__________________
Louis
2001 Supercharged Suburban 4x4.
99 Buick Regal GS Supercharged.
92 Convertable Z28 Supercharged 355cid, 9.5 to1, tpi Auto:
All Forged internals, 6in rods, w/Paxton VR4 13psi, CC blower cam .560 .570 @ .230 .235 dur @ .50 114LS, Ram air mod,100% methanol injection intercooling. W/ PAC controller,52mm T/B,ASM Large tube runners, ported upper & lower TPIS Bigmouth intakes,AFPR set to 55psi,32# injectors,1.6 Pro Magnum roller rockers,slp 1 3/4 headers,3in. cat,3in. gale banks cat back system,3.42 gears,17x9.5 Front, 17x11 Rear, Vett ZR1 wheels, 275x40x17 Front, 315x35x17 Rear G-Force tires,and much more, Check my web site for pics and mods. http://www.lbsz28blown.cz28.com
While you are on the data display screen set the information you want to keep there on line two and press N to go back one screen and select "Fix Line 2" this will lock line two in position and allow you to scroll the other lines. You can do the same thing to line three "fix line 3" etc.....
