01-22-2005, 06:27 PM
|
#1 |
| Senior Member
Join Date: Sep 2004 Location: Charles County, Maryland
Posts: 1,854
Car: 89 TA, 79Z28, 88K1500 TPI swapped Engine: 350 HSR, 350TPI Transmission: 700R4 w/ Raptor 5X 9.5" converter Axle/Gears: 3.73 8.5" ring 10 bolt | Will Tunerpro datalog for '165 ecu w/ 32B mask
| Hi guys, I built my own ALDL cable this afternoon (the 2 transistor one) and attempted to log data from my '165 ecu, running a chip with a 32b mask. Tunerpro finds the hardware succesfully, but I can't get any data when I go to begin logging. I tried connecting a 10k resistor across A and B on the diagnostic port, with no change. I notice that when I load the definition for 1227165 -- 160 baud, that it still shows a 6E mask. Does tunerpro RT not support datalogging from the '165 with a 32b mask, or should it still work with this definition file? | | |
__________________
1989 Trans Am, 1979 Z28 w/ Holley Stealth ram and MAF '165 ECM, 1988 Chevy K1500 w/ L98 and TPI swap, 2003 Mercury Marauder, 2004 Taurus SEL |
 
|  |
