I'm converting a 4.1L Buick V6 (bored and stroked to 272 cu in, 12.5:1 compression, H-beam rods... N/A race motor) to fuel injection using a 727 and probably an 8D bin (Pro Stadium Tough Truck). I'll have all my parts by the end of the week, bolt them on and then the real work begins.
I've been reading my blank off for the last 6 weeks (printed a ream of paper too)!! I like to know what and why before I start playing with the values. I have two problems, well, many more than that but I'll save those for later
1. I'm building a unique engine/EFI combination
2. NEVER MIND - I FOUND SOMETHING CLOSE
I can't find concise and complete documentation for 8D/AUJP. Not just a list of the stuff, I have that. I'm looking for "Documentation", explanations and relationships and such.
Has anyone done a logic flow chart for AUJP? It could be broken into sections similar to those listed in the stickies. E.G. Startup & idle, Open loop, closed loop, WOT, etc.
Many thanks to all who built and maintain this site. It is GREAT!!
Lastly, If you have a recommendation for a different bin that would work better for my combination please let me know. Thanks
Charles
