DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I am missing these tables from my $E6 PCM Bin Definition file:
Startup AFR Correction Decay Rate
Closed Loop Disable Upper 02 threshold
Closed Loop Disable Lower 02 threshold
Closed Loop Enable Upper 02 threshold
Closed Loop Enable Lower 02 threshold
IAC Steps Vs. Air Flow
IAC Air Flow Vs. Coolant Temp (in drive)
IAC Air Flow Vs. Coolant Temp (in park)
Throttle Follower Gain vs. Coolant temp
Throttle Follower Gain vs. RPM
Startup AFR correction decay period Vs. cool temp
Startup AFR decay period correction vs. Air Flow
I found this out by looking at what tunercat has listed for the values in their file, and comparing it to the one that I got from tunerpro's website. Also, how do I edit the decelleration enleanment, i see a flag for when it is enabled, but i don't see anything for editing the enleanment values.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
