Using Ostrich with 7727 Corvette - Third Generation F-Body Message Boards

Kevin91Z · 02-24-2007, 06:10 PM

I apologize for the non-thirdgen, but I'm also posting this on Corvetteforum.com and want the input from this wealth of knowledge, too. I also did a search here and found nothing.

Has anyone used a Moates Ostrich with the underhood computer of a Corvette? I am going to be tuning a 1991 Corvette next week, and it doesnt look like the ribbon cable is long enough to move the Ostrich to a place where it will be out of the way. Any hints or tips from the experts out there?

-=Jeff=- · 03-01-2007, 07:38 AM

Quote:

Originally Posted by Kevin91Z

I apologize for the non-thirdgen, but I'm also posting this on Corvetteforum.com and want the input from this wealth of knowledge, too. I also did a search here and found nothing.

Has anyone used a Moates Ostrich with the underhood computer of a Corvette? I am going to be tuning a 1991 Corvette next week, and it doesnt look like the ribbon cable is long enough to move the Ostrich to a place where it will be out of the way. Any hints or tips from the experts out there?

I have used the Romulator under the hood, If you keep it near the batterys back side the heat should not be as bad.. the Romulators when I used it was on an LT5 (which gets a little hotter)

Craig Moates · 03-01-2007, 11:45 PM

You could also use a 3 foot emulation cable and see how that goes.